Abstract:A low power and low phase noise phase-locked loop (PLL) is proposed in this paper to provide a quadrature millimeter-wave source for the 60GHz direct-conversion transceiver. An in-phase injection-coupled quadrature voltage controlled oscillator (IPIC-QVCO) [1] whose symmetric coupling structure is composed of four diode-connected transistors is implemented to optimize both phase noise and phase error. Besides, a novel feedback is proposed in the QVCO to reduce phase noise while remaining the oscillation frequency range unchanged. This PLL employs divider chain with a wide locking range consisting of a digitally controlled injection-locked frequency divider (ILFD) with a 2-bit binary-weighted switch-capacitor bank, 3 current mode logic (CML) dividers, and a multiple modulator divider (MMD). The proposed PLL is designed with a 65nm CMOS technology, and the QCVO achieves a tuning range of 16.39% from 55.95GHz to 65.94GHz with a phase noise of -97.5dBc/Hz at 1MHz offset while consuming 12mW of power. Extensive simulation show that the PLL achieves an excellent phase noise performance of -92dBc/Hz at 1MHz offset and covers all the four required frequency in IEEE802.11ad (58.32GHz, 60.48GHz, 62.64GHz, and 64.80GHz, respectively.) while consuming only 30mW of power from a 1.2 V supply.

2 GHz sub-harmonically injectin-locked PLL with mixer-based injection timing control in 0.18 μm CMOS technology

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

A 20 GHz Subharmonic Injection-Locked Clock Multiplier with Mixer-Based Injection Timing Control in 65 Nm CMOS Technology

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A 0.4-Ps-jitter −52-Dbc-spur Synthesizable Injection-Locked PLL with Self-Clocked Nonoverlap Update and Slope-Balanced Subsampling BBPD

A 0.8 V Low Power Low Phase-Noise Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 28ghz Injection-Locked Voltage-Controlled Oscillator Pair with Tunable Phase Outputs in 130nm CMOS.

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A 58.3-to-65.4 GHz 34.2 Mw Sub-Harmonically Injection-Locked PLL with a Sub-Sampling Phase Detection

0.2Mw 70Fsrms-Jitter Injection-Locked PLL Using De-Sensitized SSPD-Based Injecting-Time Self-Alignment Achieving -270Db FoM and -66Dbc Reference Spur

An Automatic Place-And-Routed Two-Stage Fractional-N Injection-Locked Pll Using Soft Injection

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

An HDL-synthesized Injection-Locked PLL Using LC-based DCO for On-Chip Clock Generation

A Low Spur, Low Jitter 10-Ghz Phase-Locked Loop in 0.13-Μm CMOS Technology

A Compact, Low-Power and Low-Jitter Dual-Loop Injection Locked PLL Using All-Digital PVT Calibration

60-Ghz Sub-Sampling PLL Using a Dual-Step-mixing ILFD

A Fully-Synthesizable Fractional-N Injection-Locked PLL for Digital Clocking with Triangle/Sawtooth Spread-Spectrum Modulation Capability in 5-Nm CMOS

A 68.1-to-73.8ghz E-band Low Phase Noise QPLL with Amplifier Feedback QVCO in 65-Nm CMOS

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology

A 56-To-66 Ghz Quadrature Phase-Locked Loop With A Wide Locking Range Divider Chain In 65nm Cmos