Abstract:Torrefaction is a competitive technology for biomass upgrading. Knowing that the effects of torrefaction on ash-related issues during biomass combustion and co-combustion with coal have been less investigated, Parts I and II of this work investigated the particulate matter emission and ash fouling behavior. To be a continuation, in the present paper, the effect of biomass torrefaction on ash slagging deposition which occurs in the high-temperature areas of the furnace was focused on. Two herbaceous biomass, one woody biomass, and their torrefied chars were fired and co-fired with two coals respectively on a drop-tube furnace at 1300°C. The slags were collected from mullite tubes placed in the furnace for quantification and characterization. Computer-controlled scanning electron microscope (CCSEM) was employed to obtain the distribution of particle size and inorganic species in the bulk ash. The results indicate that co-firing the biomass with high-Ca coal significantly reduces the ash slagging rates due to the substitution of alkalis by Ca from the silicates/aluminosilicates which inhibits the agglomeration and sintering of the ash particles, and finally reduces the inertial impaction and capture of the particles on the tube. Co-firing corn stalk with the high-Si/Al coal promotes the formation of alkaline aluminosilicates which are sticky at a high temperature. Therefore, the slagging tendency is exacerbated. Torrefaction reduces the ash slagging rate of sawdust resulting from the effective removal of S and Cl and the transformation of AAEMs (alkaline and alkaline earth metals) into less-reactive forms during torrefaction which reduces the vaporization and transformation of AAEMs into coarse particles as aluminosilicates by surface reactions. However, the ash slagging rates are increased by torrefaction for other fuels due to more retention of AAEMs after torrefaction resulting in more mixed silicates or aluminosilicates in bulk ash contributing to the growth of slagging deposits during combustion. Measures are suggested to be taken, such as optimizing the operation conditions, co-firing with high-Ca coals, using additives, etc. to alleviate the ash slagging during torrefied herbaceous biomass combustion.

Investigation of ash fusion characteristics on co-combustion of coal and biomass (straw, sludge, and herb residue) based on experimental and machine learning method

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Reduced Pollutant Emissions and Slagging Rate of Biomass Pellet Combustion by Optimizing the Multilayer Distribution of Secondary Air

Study on Ash Fusion Temperature Using Original and Simulated Biomass Ashes

The Thermal Behavior and Kinetics of Co-Combustion Between Sewage Sludge and Wheat Straw

Thermodynamics and synergistic effects on the co-combustion of coal and biomass blends

Composition and Sintering Characteristics of Ashes from Co-Firing of Coal and Biomass in a Laboratory-Scale Drop Tube Furnace

Co-combustion Characteristics and CO2 Emissions of Low-Calorific Multi-Fuels by TG-FTIR Analysis

Co-firing straw with coal in a swirl-stabilized dual-feed burner: modelling and experimental validation

Prediction of Ash Fusion Temperature Based on Grid Search and Support Vector Machine

Effects of torrefaction and water-washing on the mineral transformation behavior during co-combustion of straw and coal: A CCSEM analysis

The study of co-combustion characteristics of coal and duckweed by single particle and TGA methods

Catalytic and Non-Catalytic Synergistic Effects and Their Individual Contributions to Improved Combustion Performance of Coal/biomass Blends

Co-firing characteristic prediction of solid waste and coal for supercritical CO2 power cycle based on CFD simulation and machine learning algorithm

A DNS Study on Temporally Evolving Jet Flames of Pulverized Coal/biomass Co-Firing with Different Blending Ratios

Combining Support Vector Machine and Genetic Algorithm to Predict Ash Fusion Temperature

Effects of torrefaction on ash-related issues during biomass combustion and co-combustion with coal. Part 3: Ash slagging behavior

Ash-fusion Characteristics of Wheat Straw Lignin and Coal Co-Combustion

Online Blend-Type Identification During Co-Firing Coal and Biomass Using SVM and Flame Emission Spectrum in a Pilot-Scale Furnace

Ash Fusion Regulation Mechanism of Coal with Low Melting Point and Different Ash Compositions

Employing Support Vector Machine to Predict the Ash Fusion Temperature of Coal Blends