Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Ash-fusion Characteristics of Wheat Straw Lignin and Coal Co-Combustion

Investigation on Ash Deposition Formation During Co-Firing of Coal with Wheat Straw

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Ash Fusion Characteristics and Mineral Matter Transformations During Sewage Sludge/petrochemical Sludge Co-Firing with Wheat Straw

Blending ash fusion and viscosity-temperature characteristics of biomass and coal

Study on Coal Ash Fusion Characteristics with TG-DSC Method

Test and research of fusion property for ash mixtures from coal-water slurry

Ash Fusion Regulation Mechanism of Coal with Low Melting Point and Different Ash Compositions

Experiment Study on Ash Fusion Characteristics of Cofiring Straw and Sawdust

Study on Ash Fusion Process of Blended Coal by TG-DSC

Effect of co-firing straw with two coals on the ash deposition behavior in a down-fired pulverized coal combustor

Study on the Coal Ash Fusibility During Blending Coal Combusition

Fusion characteristics in c o-combustion of coal with industrial and municipal sludge

Effects of Crop Straw on Coal Ash Fusion Temperature and Prediction of Blend Ash Fusion Temperature

Quantum Chemistry Calculation and Experimental Study on Coal Ash Fusion Characteristics of Blend Coal

Analysis of Coal Ash Fusion Characteristics of High Fusibnity Coal Blending with Low's with Ternary Phase Diagram

Ash fusion characteristics and gasification activity during biomasses co-gasification process

Ash Formation and Associated Interactions during Co-Combustion of Wheat Straw and Sewage Sludge

ASH MELTING BEHAVIOR AND MINERAL TRANSITION MECHANISM UNDER GASIFICATION CONDITION

Ash Fusion Characteristics Under Complex Atmosphere in Coal Combustion Process