Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancement on the wettability of lithium battery separator toward nonaqueous electrolytes

Improving the Properties of HDPE Based Separators for Lithium Ion Batteries by Blending Block with Copolymer PE- B -PEG

Modification of Polyolefin Separators for Lithium Ion Secondary Batteries

Enhanced Separator Wettability by LiTFSI and Its Application for Lithium Metal Batteries

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

Synergistic effect of dispersant and wetting reagent on wettability, thermal Stability and electrochemical properties of PVDF-coating polyethylene separator for lithium-ion batteries

Effect of Polyphenol-Polyamine Treated Polyethylene Separator on the Ionic Conduction and Interface Properties for Lithium-Metal Anode Batteries

Improving the wettability and thermal resistance of polypropylene separators with a thin inorganic–organic hybrid layer stabilized by polydopamine for lithium ion batteries

Polypropylene Separators with Robust Mussel-inspired Coatings for High Lithium-ion Battery Performances

Effect of Non-solvent on the Performance of Polyvinylidene Fluoride Coated Polyethylene Separator for Lithium-ion Batteries

Enhancement of electrochemical performance of lithium-ion battery by single-ion conducting polymer addition in ceramic-coated separator

Enhanced performance of modified HDPE separators generated from surface enrichment of polyether chains for lithium ion secondary battery

Effect of Silica/Polyvinyl Alcohol Porous Layers on Performance of Polypropylene Separators for Lithium ion Batteries

Ether Modified Poly(ether Ether Ketone) Nonwoven Membrane with Excellent Wettability and Stability As a Lithium Ion Battery Separator

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Application of Polyethylene Separator Modified by Methyl Acrylic Polymer in Lithium Ion Battery

Ionic conductivity enhanced by crown ether bridges for lithium-ion battery separators

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin

Enhancing Interfacial Lithiophilicity and Stability with PVDF/In(NO3)3 Composite Separators for Durable Lithium Metal Anodes