Abstract:High-performance polymeric separators are indispensable materials for advanced rechargeable lithium-ion batteries (LIBs). In general, separators must simultaneously possess the following qualifications: flame retardancy, mechanical strength, wettability, and ion conductivity. In this study, polyethylenimide (PEI), which is rich in amino groups, was grafted onto the surface of polyimide fibre membranes by impregnation, resulting in the preparation of PI-PEI composite separator. The grafting of PEI on PI nanofibres resulted in the bonding of fibres, which enhanced the stability of the pore structure and mechanical properties of the nanofibres. Furthermore, the number of polar groups on the surface of the PEI grafted by the PI separator increased, which enhanced the electrolyte affinity of the PEI-PI separator. The influence of PEI concentration on the properties of the separator, electrochemical properties, and cell performances was also discussed, and the optimal PEI concentration (4%PEI) was identified. The PI-4%PEI composite separator exhibited superior wettability, mechanical strength, flame retardancy, and minimal interface impedance. In particular, PI-4%PEI separators display superior capability (127.9 mAh·g −1 @5C) in comparison to PP separators (115.4 mAh·g −1 @5C). Furthermore, the cell employing the PI-4%PEI separator displays high cycling stability and discharge specific capacity over 100 cycles at 1C. Concurrently, the modified polyimide separator exhibits remarkable stability, ensuring that the lithium-ion battery can operate safely even under high temperature working conditions.

Enhanced performance of modified HDPE separators generated from surface enrichment of polyether chains for lithium ion secondary battery

Improving the Properties of HDPE Based Separators for Lithium Ion Batteries by Blending Block with Copolymer PE- B -PEG

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries

Modification of high-density polyethylene-based separator to improve lithium-ion battery performance using nano-silica and maleic anhydride

Facile introduction of polyether chains onto polypropylene separators and its application in lithium ion batteries

Polyethylene Battery Separator with Auto‐shutdown Ability, Thermal Stability of 220°C, and Hydrophilic Surface Via Solid‐state Ultraviolet Irradiation

Application of PVDF Organic Particles Coating on Polyethylene Separator for Lithium Ion Batteries

Semi‐Interpenetrating Polymer Electrolyte As a Coating Layer Constructed on Polyphenylene Sulfide Nonwoven to Afford Superior Stability and Performance for Lithium‐Ion Batteries

Preparation of PEI-modified PI separators for advanced lithium ion batteries

H-Bond Cross-Linked Polyimide Nanofiber-Modified Polyethylene Composite Separators for Lithium-Ion Batteries

High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

Optimizing HDPE separator properties through thermoplastic elastomer loading and manufacturing process for improved lithium-ion battery electrochemical performance

Surface Modification of Polyethylene Separator for Li-Ion Batteries via Imine Formation

Tannic Acid/polyethyleneimine-Decorated Polypropylene Separators for Li-Ion Batteries and the Role of the Interfaces Between Separator and Electrolyte

Surface tailoring of polypropylene separators for lithium-ion batteries via N-hydroxyphthalimide catalysis

Thermally stable poly-aromatic solid electrolyte coated polyethylene membrane as high-performance lithium-ion battery separator

Synergistic effect of dispersant and wetting reagent on wettability, thermal Stability and electrochemical properties of PVDF-coating polyethylene separator for lithium-ion batteries

Construction Of Porous Pvdf Coating Layer And Electrochemical Performances Of The Corresponding Modified Polyethylene Separators For Lithium Ion Batteries