Abstract:The effect of both the Fe : Ni ratio (5 to 1 : 1) and the relative Lewis acidity of a metal oxide support on catalytic activity, selectivity and stability was investigated in the CO2 mediated oxidative dehydrogenation of ethane (CO2-ODH). To avoid effects of varying pore sizes, shapes and volumes of the supports, chromia and zirconia overlayers were coated onto a common γ-Al2O3 carrier (CrOx@Al2O3 and ZrOx@Al2O3). Separately, oxidic FexNiy alloy precursor nanoparticles were prepared using a nonaqueous surfactant-free method and deposited by sonication onto the carrier. In comparison to previous studies in the field, this synthesis technique yields closely associated iron and nickel increasing the chances for alloy formation. During reduction, a mixture of a bcc and a fcc alloy phase was formed, with the content of bcc increasing with increasing iron content as predicted by the bulk phase diagram. Upon exposure to carbon dioxide at elevated temperatures, the bcc metallic phase is selectively oxidised to an inverse spinel structure via the dissociation of CO2. When exposed to CO2-ODH conditions, the bare ZrOx@Al2O3 support shows no activity. The presence of FeNi phases increases the conversion of ethane and CO2 marginally (<2%) but forms ethylene at high selectivity (SC2H4 > 80%). The CrOx@Al2O3 support shows some initial activity (XC2H6 < 5%) at very high ethylene selectivity (SC2H4 > 90%) but deactivates with time on stream. Comparison of the ethane and carbon dioxide conversions suggests that direct dehydrogenation rather than the oxidative pathway is taking place. When FeNi particles with the highest Fe content are added, the ethane conversion behavior hardly changes, but the CO2 conversion is increased now supporting the stoichiometric CO2-ODH reaction (SC2H4 > 95%). It is therefore evident that a tandem catalyst system between a reducible oxide carrier and the FeNi species is required. Increasing the Ni content results in an increase in activity and stability while changing the dominant reaction pathway to a combination of dry reforming, CO2-ODH and possibly the reverse Boudouard reaction, with the latter countering catalyst deactivation through carbon deposition.

Hydrotalcite-based CoxNiyAl1Ox mixed oxide as a highly efficient catalyst for selective ethylbenzene oxidation

Mesoporous nickel-cobalt oxide for efficient liquid-phase benzyl alcohol oxidation by air

Solution-combustion Synthesized Nano-pellet α-Al2O3 and Catalytic Oxidation of Cyclohexane by Its Supported Cobalt Acetate

Cobalt single atom site catalysts with ultrahigh metal loading for enhanced aerobic oxidation of ethylbenzene

Hydrophobic Modification of Microenvironment of Highly Dispersed Co3O4 Nanoparticles for the Catalytic Selective Oxidation of Ethylbenzene

Mesoporous silica-supported Ni–Co composite metal oxide as a heterogeneous catalyst for air oxidation of benzyl alcohols

Mesoporous Co‐Al Oxide Nanosheets As Highly Efficient Catalysts for CO Oxidation

Supported FexNiy catalysts for the co-activation of CO2 and small alkanes

Development of Cobalt Oxide Nanocomposite Catalyst from Cobalt Aluminum Layered Double Hydroxide Precursor Towards Aerobic Alcohol Oxidation

High-performance CoxM3-xAlOy (M Ni, Mn) catalysts derived from microwave-assisted synthesis of hydrotalcite precursors for methane catalytic combustion

Influence of Co addition on Ni-Co mixed oxide catalysts toward the deep oxidation of low-rank unsaturated hydrocarbons

Hierarchically nanostructured bimetallic NiCo/MgxNiyO catalyst with enhanced activity for phenol hydrogenation

Ni–Co–Cu Supported on Pseudoboehmite-Derived Al2O3: Highly Efficient Catalysts for the Hydrogenation of Organic Functional Groups

Template-induced mesoporous Ni–Al oxide catalysts with tuned physico–chemical properties for the oxidative dehydrogenation of ethane

Cobalt and nitrogen co-doped hollow periodic mesoporous organosilica spheres activated by potassium chloride for selective oxidation of ethylbenzene

Enhanced phenanthrene hydrogenation saturation performance of Ni-Co/NiAlO X catalysts and its catalytic mechanism

Atmospheric and Efficient Selective Oxidation of Ethylbenzene Catalyzed by Cobalt Oxides Supported on Mesoporous Carbon Nitride

Highly efficient and stable ordered mesoporous Ti-Al composite oxide catalyst for oxidative dehydrogenation of ethylbenzene to styrene with CO2

Ni-Based Nanoparticles Catalyzed Hydrodeoxygenation of Ketones, Ethers, and Phenols to (Cyclo) Aliphatic Compounds

Cobalt Encapsulated in Nitrogen-Doped Graphite-like Shells as Efficient Catalyst for Selective Oxidation of Arylalkanes

High stable NiCoAl catalyst prepared by combustion method for the hydrodeoxygenation of lignin-derived phenolic compounds: Effect of calcination temperature