Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3><p>4‐Nitrophenol as a representative hazardous contaminant may pose potential risks to the environment in the process of production, storage, and use. Catalytic hydrogenation reduction offers a promisinng route to the removal of 4‐nitrophenol by the transformation into less toxic and biodegradable 4‐aminophenol. In this work, nickel−cobalt bimetal oxide nanostructures were fabricated by the thermal decomposition of metal organic framworks and cooperatively utilized for the catalytic reduction of 4‐nitrophenol.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3><p>The as‐fabricated oxide catalysts were characterized and analized with several physicochemical measurements including X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, thermogravimetry, Fourier‐transform infrared spectroscopy, Raman spectroscopy, nitrogen adsorption, and electrochemical impedance spectroscopy. The catalytic reduction of 4‐nitrophenol was conducted in the presence of the as‐prepared oxide nanostuctures with varying Ni/Co ratios to evaluate their catalytic activity. The optimal catalyst (Ni−Co−O) delivered the activity parameter of <i>k'</i><sub>app</sub> = 12.0 min<sup>−1</sup> mg<sup>−1</sup>, which was higher than either NiO (2.4 min<sup>−1</sup> mg<sup>−1</sup>) or Co<sub>3</sub>O<sub>4</sub> (3.6 min<sup>−1</sup> mg<sup>−1</sup>). Moreover, the induction time of the 4‐nitrophenol reduction was significantly reduced by using the bimetal oxide catalyst. Based on the surface and electrochemistry analyses, the enhancement of catalytic activity for the Ni−Co bimetal oxide nanostructures was discussed. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3><p>The above results indicated that the coorperation of nickel with cobalt into bimetal oxide nanostructures exhibited an enhanced catalytic activity, which not only promoted the conversion rate of 4‐nitrophenol, but also shortened the reduction induction period.</p><p>This article is protected by copyright. All rights reserved.</p></section>

Hierarchically nanostructured bimetallic NiCo/MgxNiyO catalyst with enhanced activity for phenol hydrogenation

Honeycomb-like Porous Ce–Cr Oxide/n-Doped Carbon Nanostructure: Achieving High Catalytic Performance for the Selective Oxidation of Cyclohexane to KA Oil

Hierarchical N‐doped Carbon Nanosheets Anchored Bimetallic Oxides for Selective Hydrogenation of Phenylacetylene

Highly efficient hydrogenation of phenol to cyclohexanol over Ni-based catalysts derived from Ni-MOF-74

Aqueous Phase Hydrodeoxygenation of Phenol on Hβ Zeolite Supported NiCo Alloy Catalysts

Enhanced phenanthrene hydrogenation saturation performance of Ni-Co/NiAlO X catalysts and its catalytic mechanism

Nanostructured Ni-MoCx: An efficient non-noble metal catalyst for the chemoselective hydrogenation of nitroaromatics

Co-Promoted CoNi Bimetallic Nanocatalyst for the Highly Efficient Catalytic Hydrogenation of Olefins

Chemoselective hydrogenation of phenol to cyclohexanol using heterogenized cobalt oxide catalysts

Ni–MoO2 heterostructure encapsulated in mesoporous silica microtubes: a structured hydrogenation catalyst with enhanced activity for reduction of 4-nitrophenol

Low-cost and highly stable Ni@NC materials synthesized from metal-organic framework precursors for selectively catalytic hydrogenation of p-nitrophenol under mild conditions

Hydrodeoxygenation of lignin-derived phenolics to cycloalkanes over Ni-Co alloy coupled with oxophilic NbOx

Fast Catalytic Transfer Hydrogenation of Phenol to Cyclohexanol over Urea Modified Ni@CN Nanoparticles

MOF ‐derived nickel−cobalt bimetal oxide nanostructures as a cooperative catalyst for the reduction of 4‐nitrophenol

Hydrogenation of Phenol to Cyclohexanol and Cyclohexanone on ZrO2-supported Ni-Co Alloy in Water

Morphological and Heterojunctional Engineering of Two-Dimensional Porous Mo-Ni Based Catalysts for Highly Effective Catalytic Reduction of Aromatic Nitro Compounds

Uniform one-dimensional hierarchical CoO x -N-C feather duster breaking the activity-stability trade-off for hydrogenation reactions

Activated Carbon Supported Non-noble Bimetallic Ni-Based Catalysts for Nitrocyclohexane Hydrogenation to Cyclohexanone Oxime under Mild Conditions

A highly dispersed Ni3P/HZSM-5 catalyst for hydrodeoxygenation of phenolic compounds to cycloalkanes

Hydrogenation of phenol to cyclohexanol using carbon encapsulated Ni–Co alloy nanoparticles

Hcp-Phased Ni Nanoparticles with Generic Catalytic Hydrogenation Activities Toward Different Functional Groups