Abstract:The Ni based catalysts have been considered as potential candidates for the CO2 methanation owing to the low cost. However, the poor low-temperature catalytic activities limit their large-scale industrial application. In order to address this challenge, a series of Co-Ni bimetal doped ordered mesoporous Al2O3 materials have been designed and fabricated via the one-pot evaporation induced self-assembly strategy and employed as the catalysts for CO2 methanation. It is found that the large specific surface areas (up to 260.0 m(2/)g), big pore volumes (up to 0.59 cm(3)/g), and narrow pore size distributions of these catalysts have been successfully retained after 700 degrees C calcination. The Co and Ni species are homogenously distributed among the Al2O3 matrix due to the unique advantage of the one-pot synthesis strategy. The strong interaction between metal and mesoporous framework have been formed and the severely thermal sintering of the metallic Co-Ni active centers can be successfully inhibited during the processes of catalyst reduction and 50 h CO2 methanation reaction. More importantly, the synergistic effect between Co and Ni can greatly enhance the low-temperature catalytic activity by coordinating the activation of H-2 and CO2, prominently decreasing the activation energy toward CO2 methanation. As a result, their low-temperature activities are evidently promoted. Furthermore, the effect of the Co/(Co + Ni) molar percentage ratio on the catalytic property has been also systematically investigated over these catalysts. It is found that only the catalyst with appropriate ratio (20.0%) behaves the optimum catalytic performances. Therefore, the current Co-Ni based ordered mesoporous materials promise potential catalysts for CO2 methanation. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Mesoporous Co‐Al Oxide Nanosheets As Highly Efficient Catalysts for CO Oxidation

An in Situ Dealloying and Oxidation Route to Co3O4 Nanosheets and Their Ambient‐Temperature CO Oxidation Activity

Ultrastable PtCo/Co3O4-SiO2 Nanocomposite with Active Lattice Oxygen for Superior Catalytic Activity Toward CO Oxidation.

Ordered Crystalline Mesoporous Oxides As Catalysts for CO Oxidation

Large-scale Synthesis and Catalytic Activity of Nanoporous Cu–O System Towards CO Oxidation

Hollow‐Co3O4@Co3O4@SiO2 Multi‐Yolk‐Double‐Shell Nanoreactors for Highly Efficient CO Oxidation

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

Highly Active and Stable Au@CuxO Core–shell Nanoparticles Supported on Alumina for Carbon Monoxide Oxidation at Low Temperature

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Noble Metal Nanoparticles Incorporated Siliceous TUD-1 Mesoporous Nano-Catalyst for Low-Temperature Oxidation of Carbon Monoxide

Enhanced CO oxidation performance over hierarchical flower-like Co 3 O 4 based nanosheets via optimizing oxygen activation and CO chemisorption

Alkaline-promoted Ni based ordered mesoporous catalysts with enhanced low-temperature catalytic activity toward CO<sub>2</sub> methanation

Highly Efficient Nano-octahedral Au/γ-Fe2O3 Catalyst Synthesized by Dealloying Combined with Calcination for Low-Temperature CO Oxidation

Low-temperature oxidation of CO catalysed by Co(3)O(4) nanorods

Thermal CO Oxidation and Photocatalytic CO2 Reduction over Bare and M-Al2O3 (M = Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, and Au) Cotton-Like Nanosheets

High-performance CoxM3-xAlOy (M Ni, Mn) catalysts derived from microwave-assisted synthesis of hydrotalcite precursors for methane catalytic combustion

CO2 Methanation over CoNi Bimetal-Doped Ordered Mesoporous Al2O3 Catalysts with Enhanced Low-Temperature Activities

Structure-induced Hollow Co3O4 Nanoparticles with Rich Oxygen Vacancies for Efficient CO Oxidation

Carbon Monoxide Combustion on Metal Oxide Supported Au@CuxO Catalysts at Low Temperature

The catalytic activity of cobalt nanoparticles for low-temperature oxidation of carbon monoxide

Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.