A multi-camera based photogrammetric method for three-dimensional full-field displacement measurements of geosynthetics during tensile test

Xiaolong Xia,Xiong Zhang,Chunmei Mu

DOI: https://doi.org/10.1016/j.geotexmem.2021.03.012

IF: 5.839

2021-10-01

Geotextiles and Geomembranes

Abstract:Conventional methods for measuring the deformational response of geosynthetics, such as the linear variable differential transformers (LVDTs), strain gauges, and extensometers have several limitations in fully determining the complete strain distribution in geosynthetics. This paper presents a multi-camera based photogrammetric method to track the 3D full-field displacements of geosynthetics during tensile tests. The proposed method extends the conventional one-camera based photogrammetry for static object measurements to multi-camera-based photogrammetry for object measurements with continuous movements or deformations. It is non-contact, cost-effective, highly accurate, and capable of measuring the 3D full-field displacements of the geosynthetics. A tensile test on a geogrid specimen was performed to verify the effectiveness and accuracy of the proposed photogrammetric method. The results from the tensile tests using both the proposed method and conventional methods, such as machine-controlled displacement measurements and extensometer, were presented and compared. It was observed that the average absolute difference between the proposed photogrammetric method and the machine-controlled movements of the bottom clamp was 0.25%, and the average absolute error was 0.038 mm. The average difference in measurements made by the proposed method and extensometer was 0.07%. It was further found that the proposed method can provide more comprehensive input, such as the complete strain and modulus distributions in the geosynthetics, for a probability-based geosynthetics design.

geosciences, multidisciplinary,engineering, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that in the tensile test of geosynthetics, the traditional measurement methods cannot comprehensively and accurately measure the full - field displacement and strain distribution of materials in three - dimensional space. Specifically:

- **Limitations of traditional methods**: Traditional mechanical strain measurement systems (such as linear variable differential transformers (LVDT), strain gauges and extensometers) can only measure displacement or strain at limited positions and within a limited range. These methods cannot detect different strain regions or potential local failure regions, which may lead to non - conservative design or catastrophic failure of the structure.
- **Research objectives**: The paper proposes a multi - camera - based photogrammetry method for tracking the three - dimensional full - field displacement of geosynthetics in tensile tests. This method is non - contact, cost - effective, highly accurate, and capable of measuring the three - dimensional full - field displacement of geosynthetics.

Through this method, researchers hope to overcome the limitations of existing methods and provide more comprehensive measurement data, including complete strain distribution and deformation modulus, thereby providing support for probability - based geosynthetic design.