Abstract:The shear behavior of the frozen soil−structure interface is important for accurately predicting the interface responses of structures adopted in the cold regions. The purpose of this study is to experimentally and theoretically investigate the shear behavior of frozen clay–concrete interface under engineering conditions. A large-scale direct shear apparatus with a temperature-controlled shear box is used to test the interface behavior. Test specimens consisting of a cement concrete block and frozen soil with initial water content ranging between 14.6% and 24.6% were prepared at different conditions of temperatures (15.4 to −9.8 °C), shear rates (0.03–0.9 mm min−1), and normal stresses (50–200 kPa). It is found that the peak shear strength is linear developing with increasing of normal stress, initial water content, and temperature. It increased from 67.7 to 133.3 kPa as the initial water content increased from 14.9% to 24.6% at temperature of −6.8 to −6.6 °C, and it increased from 51.2 to 80.6 kPa with temperature decreasing from 15.4 to −9.8 °C at initial water content of 14.6%–14.9%, furthermore it has a power law relationship with shear rate. The final vertical displacement increases with the decreasing temperature, and increasing initial water content. While, it is slight or could be ignored at lower shear rates (e.g. 0.03 mm min−1 and 0.15 mm min−1) and it is −0.25 mm and −0.28 mm at shear rate of 0.3 mm min−1 and 0.9 mm min−1, respectively. In addition, the evolution of vertical displacement also varies with test condition, the growth rate at beginning increases with increasing initial water content and decreasing temperature or ice content, which is because of the ice film effects the particle size. Moreover, a disturbed state concept model combined with linear and nonlinear characteristics is developed to describe the interface shear behavior. The disturbance D reflects the interface mechanical response and responds differently trend for different test conditions, increasing faster with increasing temperature and decreasing initial water content or shear rate. The testing results, including the test and model results, can be used to simulate the performance of engineered geotechnical assets such as earth dams or irrigation channels with concrete linings in cold regions.

A new large-scale shear apparatus for testing geosynthetics-soil interfaces incorporating thermal condition

Experimental study of shear behavior of soil-geosynthetic interface by large scale direct shear test

Large-Scale Apparatus for Monotonic and Cyclic Soil-Structure Interface Test

An Automated Large-Scale Apparatus for 3-D Cyclic Testing of Soil-Structure Interfaces

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Large-sized multifunctional geosynthetic material interface power direct shear apparatus

Multi-functional Direct Shear Apparatus for Geosynthetic Interfaces with Its Application on Various GMB/GCL Interfaces

Cyclic and post-cyclic direct shear behaviors of geogrid-sand interface with different soil densities

A New Apparatus for Shear-Seepage Testing at the Clayey Soil-Structure Interface

Experimental study on behavior of interface between soil and geotextile

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

A versatile apparatus for assessing the shear behaviour of geotechnical interfaces coupled with imaging and acoustic capabilities

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Thermomechanical Properties of Sand–structure Interface Using Temperature-Controlled Triaxial Instrument

Large-scale direct shear test investigation of the 3D behavior of a gravel-structure interfaces

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Experimental Investigation of Soil–structure Interface Behaviour under Monotonic and Cyclic Thermal Loading

Development And Verification Of Temperature-Controlled Pile-Soil Interface Triaxial Shear Test System

Predicting the Temperature-Dependent Long-Term Creep Mechanical Response of Silica Sand-Textured Geomembrane Interfaces Based on Physical Tests and Machine Learning Techniques

Testing and Modeling of Frozen Clay–concrete Interface Behavior Based on Large-Scale Shear Tests

Three-dimensional large-scale test of soil-structure interface