Abstract:Tube arrangement largely determines the flow structure as well as aero-thermal performance in finned tube heat exchangers (FTHXs). Most of the previous studies did not cover both overall performance and local thermal flow characteristics due to the physical complexity. This work is related to the comparison of various aero-thermal behaviors of rectangular finned elliptical tube heat exchangers (RFETHXs) with different tube arrangements in a turbulent flow region, from basic characteristics to optimal structures. Using 3-D numerical simulation based on the validated standard k-epsilon model, the local thermal flow characteristic as well as overall dimensional and dimensionless performances of three arrangements is investigated. Then, using variance analysis, the contribution of each structural parameter of the three arrangements on overall performance is compared after the screening of the factor of longitudinal tube pitch. Using the same CFD data as variance analysis, an elliptical basis function (EBF) model of each type of arrangements is constructed to understand the distribution of j/j(0.5) as well as PEC in the parameter range of this work. Moreover, optimal structural parameters of each arrangement are provided. It is observed that, each tube arrangement presents its own characteristic of flow separation and heat transfer coefficient distribution on fins. For the in-line and staggered row arrangements, the contributions of all the main factors and the two-way interactions on various overall performances are close, while the situation of the staggered column is different. The influence of two-way interactions is marginal in the staggered column structure, while it cannot be neglected in the two other arrangements in most cases. For j/j(0.5), the optimal structural parameter combination of the in-line and staggered row arrangements is fin thickness 0.6 mm, fin pitch 2 mm and transverse tube pitch 54 mm, whereas that of the staggered column arrangement is 0.6 mm, 2 mm and 70 mm in turn. (C) 2019 Elsevier Ltd. All rights reserved.

Study of Internal Flow Heat Transfer Characteristics of Ejection-Permeable FADS

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

Validation of the free area method for modelling fabric air dispersion system without orifices in computational fluid dynamics simulation

Study On Convective Heat Transfer In Fiber-Finned Ducts Based On The Concept Of Equivalent Thermal Conductivty

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

Flow Development Through an S-Shaped Diffusing Duct

Flow field analysis and design optimisation of Tibetan medicine double heat pump drying room

Fully-Developed Convective Heat Transfer and Pressure Drop in a Square Duct With Baffle Inserts Using CFD Analysis

Study on Heat Transfer Performances Between the High Temperature Pneumatic Duct and the Cabin

Experimental Study on Developing and Fully Developed Fluid Flow and Heat Transfer in Annular-Sector Ducts

Transient cold-front-water through y-shaped aluminium ducts: nature of turbulence, non-equilibrium thermodynamics, and velocity at the converged and diverged outlets

Experimental and Numerical Study of Developing Turbulent Flow and Heat Transfer in Convergent/divergent Square Ducts

Experimental Study Of Condensation Flow Inside Horizontal Smooth, Herringbone And Three Enhanced Surface Tubes

Transitional Flow and Heat Transfer Characteristics in a Rectangular Duct with Stagger-arrayed Short Pin Fins

Optimization and Invasive Monitoring for the Local Flow Velocity Maldistribution in Plate-Fin Heat Exchangers

Numerical Simulation on the Flow and Heat Transfer Characteristics in Dimple/protrusion Enhanced Air Handling Unit in Data Center

Eexperimental Study On Flow Evaporation Heat Transfer Characteristics Inside Horizontal Three-Dimensional Enhanced Tubes

Convective Heat Transfer Enhancement in a Circular Tube with Microfiber Fin

Study on Characteristics of Three-Dimensional Flow Fields in V-Type Heat Exchanger

Aero-thermal Behavior and Performance Optimization of Rectangular Finned Elliptical Heat Exchangers with Different Tube Arrangements

A finite volume and machine learning based investigation of flow dynamics in a vertical duct heated by the sunlight