Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dual‐Interphase‐Stabilizing Sulfolane‐Based Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

High-Safety Electrolytes with an Anion-Rich Solvation Structure Tuned by Difluorinated Cations for High-Voltage Lithium Metal Batteries

Solvation Structure and Derived Interphase Tuning for High‐Voltage Ni‐Rich Lithium Metal Batteries with High Safety Using Difluorinated Ionic Liquid Based Dual‐Salt Electrolytes

Solvation Structure and Derived Interphase Tuning for High‐Voltage Ni‐Rich Lithium Metal Batteries with High Safety Using Gem‐Difluorinated Ionic Liquid Based Dual‐Salt Electrolytes

Hybrid Electrolyte with Dual‐Anion‐Aggregated Solvation Sheath for Stabilizing High‐Voltage Lithium‐Metal Batteries

Bidirectional Interphase Modulation of Phosphate Electrolyte Enables Intrinsic Safety and Superior Stability for High-Voltage Lithium-Metal Batteries.

Targeted stabilization of solid electrolyte interphase and cathode electrolyte interphase in high-voltage lithium-metal batteries by an asymmetric sustained-release strategy

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Molecular Design of Competitive Solvation Electrolytes for Practical High‐Energy and Long‐Cycling Lithium‐Metal Batteries

High-Voltage Li Metal Batteries Enabled by Adsorption-Defluorination Mechanism

High-safety and high-voltage lithium metal batteries enabled by nonflammable diluted highly concentrated electrolyte

Highly concentrated dual-anion electrolyte for non-flammable high-voltage Li-metal batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

Quasi‐Localized High‐Concentration Electrolytes for High‐Voltage Lithium Metal Batteries

Intermolecular Interactions Mediated Nonflammable Electrolyte for High‐Voltage Lithium Metal Batteries in Wide Temperature

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Simultaneous Stabilization of Lithium Anode and Cathode Using Hyperconjugative Electrolytes for High‐voltage Lithium Metal Batteries

Hybrid-Electrolytes System Established by Dual Super-lyophobic Membrane Enabling High-Voltage Aqueous Lithium Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries