Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hybrid-Electrolytes System Established by Dual Super-lyophobic Membrane Enabling High-Voltage Aqueous Lithium Metal Batteries

Hybrid Electrolyte with Dual‐Anion‐Aggregated Solvation Sheath for Stabilizing High‐Voltage Lithium‐Metal Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

High-voltage ether-based electrolytes for lithium metal batteries via synergy between the solvent and additive

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Dual‐Interphase‐Stabilizing Sulfolane‐Based Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Strongly Solvating Triglyme-based Electrolyte Realizes Stable Lithium Metal Batteries at High-Voltage and High-Temperature

Weakly Solvating Cyclic Ether Electrolyte for High-Voltage Lithium Metal Batteries

Dilutedly localized high-concentration ionogel electrolyte enabling high-voltage quasi-solid-state lithium metal batteries

High-Safety Electrolytes with an Anion-Rich Solvation Structure Tuned by Difluorinated Cations for High-Voltage Lithium Metal Batteries

Nonflammable, localized high-concentration electrolyte towards a high-safety lithium metal battery

Quasi‐Localized High‐Concentration Electrolytes for High‐Voltage Lithium Metal Batteries

Stable interfaces constructed by concentrated ether electrolytes to render robust lithium metal batteries

High-Concentrated Binary-Salt Ether Electrolytes for High-Voltage Lithium Metal Batteries with Ni-Rich Cathode

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Advanced Hybrid Electrolyte Li-O2 Battery Realized by Dual Superlyophobic Membrane

Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries

Stabilizing Solid Electrolyte Interphases on Both Anode and Cathode for High Areal Capacity, High‐Voltage Lithium Metal Batteries with High Li Utilization and Lean Electrolyte

Enabling high-energy-density aqueous batteries with hydrogen bond-anchored electrolytes

Electrolyte Engineering for High-Voltage Lithium Metal Batteries

Rational design of hierarchically-solvating electrolytes enabling highly stable lithium metal batteries with high-nickel cathodes