Abstract:The etch profile control for the amorphous carbon layer (ACL) is an important step in the 3D NAND fabrication process. Because ACL is the mask material for defining the pattern of the high-aspect-ratio-contact (HARC) dielectric ONON layer etch process, precise control of its etch profile is necessary. Specifically, an ideal ACL mask profile should be free of symptoms such as hole circularity distortion, profile twisting, bowing, and undercutting. In order to achieve this desired etch performance, knowledge of various etch contributing factors must be systematically derived and applied, including etch surface chemistry, high-aspect-ratio (HAR) etchant transport, ion flux and ion energy angle distribution function (EADF) control, etc. In this work, we investigate the ACL etch fundamental characteristics through combined 2D chamber-scale plasma simulations with the hybrid plasma-equipment model (HPEM) and 3D etch profile simulations with the Monte-Carlo Feature Profile Model (MCFPM) for an inductively-coupled-plasma (ICP) reactor with RF bias at the substrate. In particular, we focus on the profile trends under different reactant fluxes and energies. Our findings indicate that maintaining a neutral-starved (ion-rich) etch regime is essential for mitigating both the channel hole etch circularity distortion and the slit etch profile twisting. To achieve this desired etch regime, the HAR ion, and neutral transport must controlled by the RF bias power and frequency, substrate temperature, etc. Furthermore, especially in this neutral-limited etch regime which is necessary for distortion and twisting mitigation, the control of the consequent aspect-ratio dependent etching (ARDE), as well as maintaining the critical dimension (CD) and reducing bowing and undercutting are also necessary. For this purpose, atomistic density functional theory (DFT) calculations have been applied to compare the reaction energetics for various ALD-like sidewall passivation chemistries. Specifically, we propose a new process based on its favorable reaction energetics. Experimental cross-section images have matched simulation results. In conclusion, our insights have provided guidance for process optimization and tool design to meet industrial demands.

Plasma simulation of HF plasma generated in dual-frequency chamber for high aspect ratio dielectric etching

Molecular dynamics simulation of oxide-nitride bilayer etching with energetic fluorocarbon ions

A Case of Plasma-Induced Film Breakdown in 3D NAND BEOL Dielectric Etch

A Comprehensive Study of Double-Density Hemi-Cylindrical (HC) 3-D NAND Flash

High-aspect-ratio amorphous carbon mask etch profile control through plasma and surface chemistry optimization

Modeling of fluorine-based high-density plasma etching of anisotropic silicon trenches with oxygen sidewall passivation

Impact of hydrogen plasma treatment on fluorine-contained silicon nitride films

Surface reaction modelling of thermal atomic layer etching on blanket hafnium oxide and its application on high aspect ratio structures

Voltage waveform tailoring for high aspect ratio plasma etching of SiO2 using Ar/CF4/O2 mixtures: Consequences of ion and electron distributions on etch profiles

Beyond 10 μm Depth Ultra-High Speed Etch Process with 84% Lower Carbon Footprint for Memory Channel Hole of 3D NAND Flash over 400 Layers

Etching Mechanism of Microplasma Reactor for Scanning Plasma Etching

Oxide-semiconductor channel ferroelectric field-effect transistors for high-density memory applications: 3D NAND operation and the potential impact of in-plane polarization

Study of high aspect ratio etching in silicon by a mixture of SF6/O2 using a 2-D model based on a Monte Carlo approach.

Negative charge injection to a positively charged SiO2 hole exposed to plasma etching in a pulsed two-frequency capacitively coupled plasma in CF4/Ar

Simulation of SiO2 etching in an inductively coupled CF4 plasma

Spectroscopic Analysis of CF4/O2 Plasma Mixed with N2 for Si3N4 Dry Etching

A New Microplasma Reactor for Scanning Plasma Etching

Study on Wafer De-Chuck for High Aspect Ratio Etch Process

Simulation of Hollow-Cathode-nitriding Plasma and Design of Diffusion Equipment with DC and RF Dual Discharge

Simulation of SiO<sub>2</sub> etching in an inductively coupled CF<sub>4</sub> plasma

Nanosphere monolayer-templated, ion-assisted nanofeature etching in dielectric materials: a numerical simulation of nanoscale ion flux topography.