Abstract:Deposition on heat exchange surfaces is an urgent problem to be solved to achieve efficient utilization of energy in thermal equipment. To mitigate deposition and the resultant heat attenuation, this work proposes a mixed tube bundle strategy of inserting attached cylinders behind the tube bundle, which can effectively meet the design requirements of high anti-deposition performance, high heat transfer efficiency, and low flow resistance. An integrated dynamic model for deposition is developed to elucidate the effect of ash particles on deposition, flow, and heat transfer characteristics. Based on the inverse distance weighting interpolation, a dynamic mesh smoothing technique is employed to simulate the evolving deposition layer on the heat transfer surface. In addition, the L 16 (4 3 ) orthogonal experimental design method is adopted to study the influence of the arrangement angle, diameter, and distance to the primary bundle of the attached cylinder on the overall performance, and determine the optimal scheme. The results show that deposition in the cases using the mixed tube bundle strategy has significantly decreased. The weakening effects of the attached cylinder on the deposition of small-medium particles and large-sized particles are due to the inhibition of vortex development in the gap of tube bundle and the deviation of the motion trajectory, respectively. The novel design exhibits the lowest deposition mass M dep = 1.12 g and the best comprehensive performance PEC = 1.14 under the condition of the arrangement angle of 50°, the diameter of 10 mm, and the distance between the primary bundle of 5 mm. The obtained results can provide reference schemes and guidance for the optimization of the design of heat exchange equipment and accessory devices.

Dynamic CFD modeling evaluation of ash deposition behavior and morphology evolution with different tube arrangements

Dynamic evaluation of ash deposition behavior and parametric study using an inverse distance weighted interpolation dynamic mesh method

CFD modelling of biomass ash deposition under multiple operation conditions using a 2D mass-conserving dynamic mesh approach

Dynamic CFD modeling and evaluation of ash deposition behaviors during Zhundong coal combustion

Understanding the Ash Deposition Formation in Zhundong Lignite Combustion Through Dynamic CFD Modelling Analysis

A Numerical Simulation Study into the Effect of Longitudinal and Transverse Pitch on Deposition of Zhundong Coal Ash on Tube Bundles

Numerical study of solid particle erosion on sidewall

Simulation of Ash Deposition in Different Furnace Temperature with a 2D Dynamic Mesh Model

Simulating growth of ash deposit in boiler heat exchanger tube based on CFD dynamic mesh technique

Numerical simulation and mathematical models of ash deposition behavior considering particle properties and operating conditions

Understanding the effects of mesh smoothing methods in the CFD modelling of Zhundong lignite ash deposition

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Mechanisms and strategies for ash deposition reduction in flue gas heat exchanger

Numerical Study of Solid Particle Erosion on the Tubes Near the Side Walls in A Duct with Flow Past an Aligned Tube Bank

Influences of Various Vortex Structures on the Dispersion and Deposition of Small Ash Particles

Influences of vortices on impaction and distribution of small ash particles on rear side surface of boiler tube

Two-dimensional numerical model for predicting fouling shape growth based on immersed boundary method and lattice Boltzmann method

Co-simulating fouling, erosion of gas-particle flow and morphologies predictions around circular tube via parallel CFD–DEM modeling

Comprehensive evaluation on deposition and heat transfer performance of the mixed tube bundle based on orthogonal experimental study

Numerical Simulation of Fly Ash Deposition in Coal and Corn Stalk Co-Combustion with Dynamic Mesh Technique

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics