Abstract:The present paper reports the theoretical results on the thermal performance of proposed Integrated Hybrid Nanofluid Hemi-Spherical Fin Model assuming a combination of Fe3O4-Ni/C6H18OSi2 hybrid nanofluid. The model leverages the concept of symmetrical geometries and optimized nanoparticle shapes to enhance the heat flux, with a focus on symmetrical design applications in thermal engineering. The simulations are carried out by assuming a silicone oil as a base fluid, due to its exceptional stability in hot and humid conditions, enriched with superparamagnetic Fe3O4 and Ni nanoparticles to enhance the heat transfer capabilities, with the aim of contributing to the field of nanotechnology, electronics and thermal engineering, The focus of this work is to optimize the heat dissipation in systems that require high thermal efficiency and stability such as automotive cooling systems, aerospace components and power electronics. In addition, the study explores the influence of key parameters such as heat transfer coefficients and thermal conductivity that play an important role in improving the thermal performance of cooling systems. The overall thermal performance of the model is evaluated based on its heat flux and thermal efficiency. The study also examines the impact of the shape optimized nanoparticles in silicone oil by incorporating shape-factor in its modelling equations and proposes optimization of parameters to enhance the overall thermal performance of the system. Darcy's flow model is used to analyse the key parameters in the system and study the thermal behaviour of the hybrid nanofluid within the fin by incorporating natural convection, temperature-dependent internal heat generation, and radiation effects. By using the similarity approach, the governing equations were reduced to non-linear ordinary differential equations and numerical solutions were obtained by using four-stage Lobatto-IIIA numerical technique due to its robust stability and convergence properties. This enables a systematic investigation of various influential parameters, including thermal conductivity, emissivity and heat transfer coefficients. Additionally, it stimulates interest among researchers in applying mathematical techniques to complex heat transfer systems, thereby contributing towards the development of highly efficient cooling system. Our findings indicate that there is a significant enhancement in the heat flux as well as improvement in the thermal efficiency due to the mixture of silicone oil and shape optimized nanoparticles, that was visualized through comprehensive graphical analysis. Quantitatively, the proposed model displays a maximum thermal efficiency of 57.5% for lamina shaped nanoparticles at Nc = 0.5, Nr = 0.2, Ng = 0.2 and Θa = 0.4. The maximum enhancement in the heat flux occurs when Nc doubles from 5 to 10 for m2 = 0.2 and Nr = 0.1. Optimal thermal performance is found for Nc, Nr and m2 values in the range 5 to 10, 0.2 to 0.4 and 0.4 to 0.8 respectively.

Improving thermal performance of hydrodynamic couplings through heat sink design with functionally graded fins

Cooling Performance Analysis of Outside Fins of the Closed Circuit Axial Piston Transmission

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Temperature Calculation, Test and Structure Improvement of Magnetic Coupling under High Slip

Alleviating thermal challenges in hydrodynamic bearings: A Novel approach through thrust bearing pads with embedded cooling circuitry and deep Recess

Differential transformation method to determine heat transfer in annular fins

Thermal Analysis of a Hybride Excitation Flux-Switching Motor with Water-Cooling System

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Computationally Efficient Surrogate-Based Magneto-Fluid-Thermal Numerical Coupling Approach for a Water-Cooled IPM Traction Motor

A highly efficient and sustainable heat sink via liquid film boiling in hybrid mesh with active liquid supply

Heat transfer enhancement in magnetohydrodynamic hybrid nanofluids over a Bi-directional extending sheet with slip and convective conditions

Surrogate Model-Based Heat Sink Design for Energy Storage Converters

Dynamic Characterization and Optimization of Heat Flux and Thermal Efficiency of a Penetrable Moving Hemispherical Fin Embedded in a Shape Optimized Fe3O4-Ni/C6H18OSi2 Hybrid Nanofluid: L-IIIA Solution

Enhancing heat transfer in power transformer radiators via thermo-fluid dynamic analysis with periodic thermal boundary conditions

The Performance Simulation and Optimization on Plate Fin Oil Coolers

Optimization and Evaluation of a High-Performance Liquid Metal CPU Cooling Product

A heat sink integrating fins within high thermal conductivity phase change material to cool high heat-flux heat sources

Performance Analysis and Structural Optimization of a Finned Liquid-Cooling Radiator for Chip Heat Dissipation

Numerical Analysis of the Magnetic Field Impact on Hydrothermal Characteristics of a Microchannel Heatsink with Fe3O4 Ferrofluid and Various Pin-Fin Shapes