Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

A highly efficient and sustainable heat sink via liquid film boiling in hybrid mesh with active liquid supply

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An open superhydrophilic microchannel heat sink for thin film boiling with a high coefficient of performance

High performance heat sink with counter flow diverging microchannels

Design of micro-nano structures for counter flow diverging microchannel heat sink with extraordinarily high energy efficiency

High heat flux dissipation of membrane-venting heat sink with thin film boiling

Efficient Thermal Management of High-Power Electronics Via Jet-Enhanced HU-type Manifold Microchannel

Achieving ultra-high coefficient of performance of two-phase microchannel heat sink with uniform void fraction

Hierarchical gradient mesh surfaces for superior boiling heat transfer

Hybrid Mini/Micro-Channel Heat Sink Using Liquid Metal and Water As Coolants

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

Liquid Super‐Spreading Boosted High‐Performance Jet‐Flow Boiling for Enhancement of Phase‐Change Cooling

Extremely high heat flux dissipation and hotspots removal with nature-inspired single-phase microchannel heat sink designs

Scalable capillary-pin-fin structure enabled efficient flow boiling

Hybrid Surfaces with Capillary Wick and Minichannels for Enhancement of Phase-Change Immersion Cooling of Power Electronics

Cooling high heat flux with flow boiling in 2D-structured radial microchannel heat sink

Electrically driven chip cooling device using hybrid coolants of liquid metal and aqueous solution

Highly efficient pool boiling heat transfer on surfaces with zoned rose-petal-inspired hierarchical structures

An additively manufactured manifold-microchannel heat sink for high-heat flux cooling

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Supercapillary Architecture‐Activated Two‐Phase Boundary Layer Structures for Highly Stable and Efficient Flow Boiling Heat Transfer