Abstract:In order to explore the deposition mechanism of the nickel-based coating prepared by jet electrodeposition, accurately control the thickness of the coating, and improve the coating performance, the deposition mechanism and process experiments of the nickel-based coating prepared by jet electrodeposition were carried out. Based on this deposition mechanism, a multi-physical field coupling model of the deposition process was established, and numerical solutions of the deposition processes at different scanning speeds were formulated. The numerical distribution of each physical field and the deposition thickness of nickel-based coating were obtained, a corresponding experiment for exploring preparation process was carried out, the cross-section thickness of the coating was measured, the wear resistance and corrosion resistance of the coating were characterised and the coating thickness obtained using the experiment results and numerical solution was analysed. Results show that the coating thickness obtained after the process test and that obtained using the numerical solution increase first and then decrease. The average engineering error δ is 19.43%, which verifies the accuracy of the numerical solution model. When the scanning speed is 200–1000 mm/min, the grain size of the coating decreases with increasing scanning speed, whereas microhardness, wear resistance and corrosion resistance increase first and then decrease. When the scanning speed is 600 mm/min, the nickel-based coating has good comprehensive properties, the maximum thickness is 26.65 ± 0.28 μm, the microhardness is 622.82 HV, the wear area is 2766.75 μm 2 , the self-corrosion potential is − 0.33 V, the self-corrosion current density is 5.16E-7 A cm 2 and the equivalent impedance is 4660 Ω.

An Experimental Study of Bipolar Pulse Electroforming Nickel

Design and Experimental Research on the Electricity Parameter of Micro-electroforming

Pulse Electroplating Of Gold-Nickel Alloys: Morphological and Aesthetic Improvement Compared to DC

An Electrochemical Study of Micro-electroforming Ni for LIGA Technique

Electrochemical Studies Of Electrodeposition Of Nickel For Liga Microstructures

Study of the Effect of Electric Field Distribution to the Pulse Electrochemical Machining

Processing and Characterization of Precision Microparts from Nickel-based Materials

Effect of Pulse Electrodeposition Mode on Microstructures and Properties of Ni-TiN Composite Coatings

Influence of Average Current Density and Pulse Frequency on Morphology and Structure of Pulse-reverse Current Electroplated Ni Plating

A systematic study of pulse and pulse reverse plating on acid copper bath for decorative and functional applications

Novel Electroless Nickel Plating Process

Preparation of thin solid CoNiFe films by pulse-reverse electroplating technique

Effect of Pulse Parumeters on Structure and Properties of NickelCoating

Recent Progress in Electrodeposition of Ni and Ni-based Alloys

Process for Nickel-Phosphorous Pulse Electroplating and Corrosion Resistance of the Alloy Coating

Electrodeposition and Characterization of Nano-Structured Black Nickel Thin Films

Influence of Artificial Exchange Current Density on Microstructure of Ni Films by Pulse-Reverse Electroplating

New Electroplating Technology for Magnesium Alloys

Numerical solution and experimental study of Multi-field coupling for nickel-based coatings prepared by scanning electrodeposition at different currents

Electroforming of nickel and partially stabilized zirconia (Ni + PSZ) gradient coating

Simulation and experimental research on nickel-based coating prepared by jet electrodeposition at different scanning speeds