Abstract:In this work, three industry-related metallization approaches for silicon heterojunction (SHJ) solar cells are presented which are aiming for a reduction of silver consumption compared to conventional screen-printing of low-temperature silver pastes. The presented results are achieved on large-area cells (area of 244.3 cm2). Firstly, the cell results reveal that with silver-coated copper pastes for screen-printing comparable results as with pure silver pastes can be achieved but with a potentially reduced silver consumption of 30%. Median efficiencies of 21.6% are achieved in both cases utilizing a five busbar cell design. A second approach to reduce the silver consumption is the use of inkjet-printing. The influence of the inkjet-printed layer number per contact finger on the cell performance of busbarless cells is investigated. A maximum conversion efficiency of 23.3% of an inkjet-printed solar cell is achieved within this study. Thirdly, a novel printing technology established at Fraunhofer ISE, called FlexTrail-printing, is introduced. By utilizing the same Ag nanoparticle ink like in the case of inkjet-printing, the finger width is reduced from 75 ± 1 µm down to 16 ± 1 µm on alkaline textured SHJ solar cells. To the authors’ knowledge, this is the smallest feature size ever published on ITO-coated, textured silicon surfaces. A maximum conversion efficiency of 23.7% is measured (busbarless cell). Only 0.3 ± 0.1 mg Ag nanoparticle ink is consumed during FlexTrail-printing on a large-area wafer with a front grid of 80 fingers.

High-aspect-ratio silver grids of solar cells prepared by direct writing

Optimizing Silver Paste Conductivity with Controlled Convection for Nanowrinkle Growth

Paste Development for an Optimized Filament Stretching Effect During Parallel Dispensing on Transparent Conductive Oxide Layers for Solar Cell Metallization

Preparation of Superfine Spherical Silver Powders for Solar Cell Silver Paste Via Non-wetting Effect of the Liquid/Solid Interface

Synthesis of Silver Flakes and Their Application as Conductive Filler for Low-Curing-Temperature Silver Pastes

The self-induced electric-field-driven jet printing for fabricating ultrafine silver grid transparent electrode

Silver frameworks based on self-sintering silver micro-flakes and its application in low temperature curing conductive pastes

Preparation of Sub-micron Spherical Silver Powders for Solar Cell Paste

Filament stretching during micro-extrusion of silver pastes enables an improved fine-line silicon solar cell metallization

Design of advanced porous silver powder with high-sintering activity to improve silicon solar cells

Screen-Printable Cu–Ag Core–Shell Nanoparticle Paste for Reduced Silver Usage in Solar Cells: Particle Design, Paste Formulation, and Process Optimization

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

Effects of Silver Nanoparticles on the Firing Behavior of Silver Paste on Crystalline Silicon Solar Cells

Dispensing of low-temperature silver pastes

INFLUENCE OF SILVER PASTE COMPOSITION ON OF SCREEN-PRINTED OHMIC CONTACTS SILICON SOLAR CELLS

High temperature-assisted electrohydrodynamic jet printing of sintered type nano silver ink on a heated substrate

Advanced metallization with low silver consumption for silicon heterojunction solar cells

Preparation of Nano Silver Paste and Applications in Transparent Electrodes via Electric-Field Driven Micro-Scale 3D Printing

Effect of Rheological Property of Silver Conductive Paste on Electrical Property of Si Solar Cells

Green Approach to Prepare Silver Nanoink with Potentially High Conductivity for Printed Electronics

Rheological effect on screen-printed morphology of thick film silver paste metallization