Abstract:Printed electronics (PE) technology shows huge promise for the realisation of low-cost and flexible electronics, with the ability to pattern heat- or pressure-sensitive materials. In future developments of the PE market, the ability to produce highly conductive, high-resolution patterns using low-cost and roll-to-roll processes, such as inkjet printing, is a critical technology component for the fabrication of printed electronics and displays. Here, we demonstrate inkjet printing of polyacrylic acid (PAA) capped silver nanoparticle dispersions onto paper for high-conductivity electronic interconnects. We characterise the resulting print quality, feature geometry and electrical performance of inkjet patterned features and demonstrate the high-resolution printing, sub-100 micron feature size, of silver nanoparticle materials onto flexible paper substrate. Printed onto photo-paper, these materials then undergo chemically triggered sintering on exposure to chloride contained in the paper. We investigated the effect of substrate temperature on the properties of printed silver material from room temperature to 50 °C. At room temperature, the resistivity of single layer printed features, of average thickness of 500 nm and width 85 μm, was found to be 2.17 × 10−7 Ω·m or 13 times resistivity of bulk silver (RBS). The resistivity initially decreased with an increase in material thickness, when achieved by overprinting successive layers or by decreasing print pitch, and a resistivity of around 10 times RBS was observed after overprinting two times at pitch 75 μm and with single pass print pitch of between 60 and 80 μm, resulting in line thickness up to 920 nm. On further increases in thickness the resistivity increased and reached 27 times RBS at print pitch of 15 μm. On moderate heating of the substrate to 50 °C, more compact silver nanoparticle films were formed, reducing thickness to 200 nm from a single pass print, and lower material resistivity approaching five times RBS was achieved.

High temperature-assisted electrohydrodynamic jet printing of sintered type nano silver ink on a heated substrate

Method of multi-layer near-field electrohydraulic printing and sintering of nano-silver ink prepared by liquid phase reduction

The self-induced electric-field-driven jet printing for fabricating ultrafine silver grid transparent electrode

Preparation of Nano-Silver Conductive Ink and Electrode Properties

Preparation of low-temperature sintered high conductivity inks based on nanosilver self-assembled on surface of graphene

Direct Patterning by Inkjet Printing 3-Mercaptopropionic Capped Nano Silver Suspension

Inkjet Printing of Polyacrylic Acid-Coated Silver Nanoparticle Ink onto Paper with Sub-100 Micron Pixel Size

Green Approach to Prepare Silver Nanoink with Potentially High Conductivity for Printed Electronics

Silver Nano-Inks Synthesized with Biobased Polymers for High-Resolution Electrohydrodynamic Printing Toward In-Space Manufacturing

Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics

Preparation of Nano Silver Paste and Applications in Transparent Electrodes via Electric-Field Driven Micro-Scale 3D Printing

An conductive ink based on silver oxide complex for low-temperature sintering with dense conductive paths

An Approach to a Silver Conductive Ink for Inkjet Printer Technology

Self-Driven, Monopolar Electrohydrodynamic Printing via Dielectric Nanoparticle Layer

Low-temperature sintering of silver patterns on polyimide substrate printed with particle-free ink

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink

Enhancing the electrical properties of inkjet-printed silver ink by electrolyte sintering, photonic sintering, and electroless plating

Inkjet Printing of Nanosized Silver Colloids

Development of Silver Nanoparticle Ink for Printed Electronics

Room Temperature Electronic Functionalization of Thermally Sensitive Substrates by Inkjet Printing of a Reactive Silver‐Based MOD Ink

Silver flake/polyaniline composite ink for electrohydrodynamic printing of flexible heaters