Abstract:Printed electronics (PE) technology shows huge promise for the realisation of low-cost and flexible electronics, with the ability to pattern heat- or pressure-sensitive materials. In future developments of the PE market, the ability to produce highly conductive, high-resolution patterns using low-cost and roll-to-roll processes, such as inkjet printing, is a critical technology component for the fabrication of printed electronics and displays. Here, we demonstrate inkjet printing of polyacrylic acid (PAA) capped silver nanoparticle dispersions onto paper for high-conductivity electronic interconnects. We characterise the resulting print quality, feature geometry and electrical performance of inkjet patterned features and demonstrate the high-resolution printing, sub-100 micron feature size, of silver nanoparticle materials onto flexible paper substrate. Printed onto photo-paper, these materials then undergo chemically triggered sintering on exposure to chloride contained in the paper. We investigated the effect of substrate temperature on the properties of printed silver material from room temperature to 50 °C. At room temperature, the resistivity of single layer printed features, of average thickness of 500 nm and width 85 μm, was found to be 2.17 × 10−7 Ω·m or 13 times resistivity of bulk silver (RBS). The resistivity initially decreased with an increase in material thickness, when achieved by overprinting successive layers or by decreasing print pitch, and a resistivity of around 10 times RBS was observed after overprinting two times at pitch 75 μm and with single pass print pitch of between 60 and 80 μm, resulting in line thickness up to 920 nm. On further increases in thickness the resistivity increased and reached 27 times RBS at print pitch of 15 μm. On moderate heating of the substrate to 50 °C, more compact silver nanoparticle films were formed, reducing thickness to 200 nm from a single pass print, and lower material resistivity approaching five times RBS was achieved.

Inkjet Printing of Nanosized Silver Colloids

Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics

Green Approach to Prepare Silver Nanoink with Potentially High Conductivity for Printed Electronics

Preparation of Nano-Silver Conductive Ink and Electrode Properties

Cost-effective Silver Nano-Ink for Inkjet Printing in Application of Flexible Electronic Devices

Ink-Jet Printing of Silver Conductive Tracks on Flexible Substrates

An Approach to a Silver Conductive Ink for Inkjet Printer Technology

Development of Silver Nanoparticle Ink for Printed Electronics

Preparation of silver nanoparticles and application in water-based conductive inks

Amphiphilic Silver Nanoparticles for Inkjet-Printable Conductive Inks

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

Inkjet Printing of Polyacrylic Acid-Coated Silver Nanoparticle Ink onto Paper with Sub-100 Micron Pixel Size

Facile Synthesis of Silver Nanoparticles and Preparation of Conductive Ink

Preparation of low-temperature sintered high conductivity inks based on nanosilver self-assembled on surface of graphene

Nano-organic silver composite conductive ink for flexible printed circuit

Development of a silver nanoparticle ink for fine line patterning using gravure offset printing

Novel Insights into Inkjet Printed Silver Nanowires Flexible Transparent Conductive Films

Low Temperature Sintering Nano-Silver Conductive Ink Printed on Cotton Fabric As Printed Electronics

Preparation of a High Conductive Ink with Silver Nanopaticles and Silver Nanorods

Reactive Conductive Ink Capable of in Situ and Rapid Synthesis of Conductive Patterns Suitable for Inkjet Printing

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications