Abstract:Amorphous hydrous ruthenium oxide/active carbon (RuO2. xH(2)O/C) powders were prepared by a simple procedure based on the sol-gel process. The precursor was obtained by mixing an aqueous solution of RuCl3 and active carbon powders at pH 7. When annealing the precursor at 150 degreesC for 7-9.5 h, the RuO2. xH(2)O/C powders obtained had the highest specific capacitance. Transmission electron microscopy photographs showed that the RuO2. xH(2)O primary particles were about 10-15 nm diam. They adhered to form large porous secondary particles. A modeling capacitor was made with electrodes comprised of RuO2. xH(2)O/C powder and 30% H2SO4 electrolyte. At 10-20 wt % ruthenium in the electrodes, the specific capacitance remained almost unchanged at 243 F/g, which included both the electric double-layer capacitance associated with the high surface area of active carbon and redox capacitance associated with ruthenium oxide. About 52% of the RuO2 in the RuO2. xH(2)O/C powders was utilized. More than 50% of the capacitance in the electrode with 12.1% ruthenium was due to the formation of the double layer, but for the electrode with 21.1% ruthenium, the capacitance attributed to the double layer dropped to 16.8% of the total capacitance. When the electrodes contained ruthenium from 35 wt % to pure RuO2. xH(2)O, the specific capacitance increased from 350 to 715 F/g. The specific capacitance was proportional to the mass of the ruthenium in the electrodes. This enabled the specific capacitance to be controlled by changing the mass ratio of RuCl3 to active carbon in the preparation. Physical properties of the material and electrochemical characteristics of electrodes are also reported along with the capacitor performance. (C) 2001 The Electrochemical Society.

Morphology and Electrochemistry of Ruthenium/Carbon Aerogel Nanostructures

Nanostructure Optimization of LiFePO4/carbon Aerogel Composites for Performance Enhancement

Carbon Nanotube Capacitor Materials Loaded with Different Amounts of Ruthenium Oxide

Electrochemical Behavior Of Amorphous Hydrous Ruthenium Oxide/Active Carbon Composite Electrodes For Super-Capacitor

Pseudo-capacitance of ruthenium oxide/carbon black composites for electrochemical capacitors

Preparation And Electrochemistry Of Hydrous Ruthenium Oxide/Active Carbon Electrode Materials For Supercapacitor

Hydrous Ruthenium Oxide with High Rate Pseudo-Capacitance Prepared by a New Sol-Gel Process

Ultralow Loading Ruthenium Nanoparticles on Nitrogen‐Doped Graphene Aerogel for Trifunctional Electrocatalysis

Nano ruthenium oxide/carbon nanotubes composite electrode material for electrochemical capacitors

Nanocomposites of V2o5 Aerogel and Ruo2 As Cathode Materials for Lithium Intercalation

Supercapacitive Properties Of Hydrous Ruthenium Oxide/Multi-Walled Carbon Nanotubes Nanocomposite

The production of rGO/ RuO2 aerogel supercapacitor and analysis of its electrochemical performances

Ru-promoted NiFe oxyhydroxide anchored on the hierarchical porous N-doped carbon aerogel: electronic structures modulation for much enhanced OER/HER dual-functional characteristics

Interfacial electron modulation for Ru particles on Cu aerogel as an efficient electrocatalyst for hydrogen evolution reaction

Atomically dispersed ruthenium in carbon aerogels as effective catalysts for pH-universal hydrogen evolution reaction

Nanoporous Carbon: Liquid-Free Synthesis and Geometry-Dependent Catalytic Performance.

Partially oxidized inter-doped RuNi alloy aerogel for the hydrogen evolution reaction in both alkaline and acidic media

Flexible Ru/Graphene Aerogel with Switchable Surface Chemistry: Highly Efficient Catalyst for Room‐Temperature CO Oxidation

Mechanochemically Assisted Synthesis of Ruthenium Clusters Embedded in Mesoporous Carbon for an Efficient Hydrogen Evolution Reaction

Enhanced Electrochemical Performance of Hydrous RuO2/mesoporous Carbon Nanocomposites Via Nitrogen Doping.

Synthesis of Ruthenium Oxide Coated Ordered Mesoporous Carbon Nanofiber Arrays As A Catalyst for Lithium Oxygen Battery