Abstract:The development of efficient and compact reactors is an urgent need in the field of distributed hydrogen production. Steam reforming of methane is the main method to produce hydrogen. Aiming at the problems of high heat and mass transfer resistance of the existing fixed bed reactors, and the difficulty of replacing the wall-coated catalyst in the microreactors, a composite packed bed was proposed to meet the demand of small-scale hydrogen production. The structure consists of a multi-channel framework with high thermal conductivity, which is filled with Ni/Al2O3 catalyst particles in each channel. A three-dimensional numerical model of the steam methane reforming process in the novel reactor was established using ANSYS FLUENT software. The heat transfer and reaction characteristics in the reactor were studied. Firstly, the advantages of the multi-channel skeleton in enhancing the radial heat transfer performance were verified by comparing it with the traditional randomly packed bed without the channel skeleton. Secondly, the influences of inlet velocity, inlet temperature, and heating wall temperature on the heat transfer and reaction performances in the reactor were studied, and a sensitivity factor was adopted to do the sensitivity analysis. The results show that the methane conversion rate is most sensitive to the wall temperature, while the inlet velocity and inlet temperature have less effect. Finally, the effects of two skeleton materials were studied. The results show that when the wall temperature is higher than 1200 K, there is no significant difference between these two reactors, which indicates that the use of cordierite with a lower price, but also with a lower thermal conductivity can significantly reduce the reactor's cost. The conclusions can be used as a reference for the design of small-scale hydrogen production reactors.

Advancements in microreactor technology for hydrogen production via steam reforming: A comprehensive review of numerical studies

Advancements in Microreactor Technology for Hydrogen Production Via Steam Reforming: A Comprehensive Review of Experimental Studies

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Progress on Methanol Reforming Technologies for Highly Efficient Hydrogen Production and Applications

Hydrogen production using advanced reactors by steam methane reforming: A review

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

METHANOL STEAM REFORMING FOR HYDROGEN PRODUCTION OVER Ni‐BASED CATALYSTS: STATE‐OF‐THE‐ART REVIEW AND FUTURE PROSPECTS

Recent trends in the development of reactor systems for hydrogen production via methanol steam reforming

Hydrogen Production via Steam Reforming: A Critical Analysis of MR and RMM Technologies

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Advances on methane steam reforming to produce hydrogen through membrane reactors technology: A review

Research Progress on Characteristics of On‐Line Hydrogen Production by Methanol Steam Reforming

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Standalone ethanol micro-reformer integrated on silicon technology for onboard production of hydrogen-rich gas

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

On-board methanol catalytic reforming for hydrogen Production-A review