Abstract:The article presents the findings of a study conducted on a range of microsilicon grades selected at the Bratsk Ferroalloy Plant. The following analytical techniques were employed: X-ray fluorescence analysis, X-ray diffraction analysis, a granulometric composition study, and pozzolanic properties. The grades of the investigated microsilicon are compared with the furnace grade and the grade of the produced ferrosilicon. The findings of the research conducted at the Bratsk Ferroalloy Plant indicate that the microsilicon produced at the facility is suitable for use as an additive in the production of tires, artificial irregularities, and other rubber products intended for use on roads. In such applications, the quality and durability of the material are determined by its ability to withstand abrasion and wear. Therefore, it is essential to utilize the purest, most amorphous, and most finely dispersed silicon dioxide. The gas cleaning device GCD-4 FeSi-75 exhibits the greatest number of these parameters among the samples presented. Different samples of microsilica have a color from white to dark gray. The chemical and granulometric compositions were determined. The pozzolan activity was investigated. Based on the conducted analyses, it is possible to draw conclusions about the properties of materials and the potential for use in the construction industry for concretes of various values. The results of the analyses indicate that silicon dioxide with GCD-4 FeSi-75 is suitable for use in critical concrete structures. The quality of the silicon dioxide with GCD-4 FeSi-75 can be compared with that of Elkem 971. It is recommended that all the studied samples be employed as modifiers for cast iron, with the GCD-4 FeSi-75 sample being the optimal choice for testing in steels. The utilization of this modifier enables a reduction in the consumption of FeSi, exerting both an alloying and modifying effect on the melt. However, it is essential to emphasize the necessity for technological selection of the method of administration, as the powder, in its pure form, is susceptible to combustion and is not readily digestible. The quality of such a modifier, with a stable guaranteed effect, is comparable to the use of FeSi. Silicon dioxide plays an essential role in the production of refractories. The primary criteria for this industry are purity, the minimum content of the crystalline phase, and the activity of the material. It is recommended that the material from GCD-4 FeSi-75 be used in the production of refractories.

Research and development of the technology for producing fused zirconia

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

Zirconia Ceramics Consolidated by Oscillatory Pressure Sintering and Subsequent Carburization

Production of Low-Porous Mullite Ceramics Modified with Zirconium Oxide

Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability

Phase stability and microstructure morphology of microwave-sintered magnesia-partially stabilised zirconia

Processing of Zirconium Oxide Raw Materials to Produce Zirconium Silicides via Electrolysis of KCl-K2SiF6-ZrO2 Melt

Development of a technology for producing ceramic refractory material in a composition of montmorillonite clays (bentonite-like) and ferrochrome production wastes

Crystal phase study of stabilized zirconia collected by dust catcher during airflow pulverization

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres

Role of t-ZrO2 stabilization methods in phase composition, structure and properties of ZTA ceramics

Research and Industrialization Progress of Ceria-Zirconia Mixed Oxides

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

One-step Synthesis of T-Zro2 from Zircon Using Magnesium-Calcium Minerals As Stabilizers

Processing conditions and mechanisms for the plasma defect-engineering of bulk oxygen-deficient zirconia

Preparation method of scandium oxide-stabilized zirconium oxide nano-powder

Scientific substantiation and development of innovative processes for the extraction of zirconium and rare earth elements in the deep and comprehensive treatment of eudialyte concentrate

Research on Sintering Process of YSZ Electrolyte

Preparation of Zirconia Ceramics with High Density and Fine Grains by Oscillatory Pressure Sintering

Self-propagating high-temperature synthesis of refractory powder materials based on zirconium diboride obtained from boron-containing mineral raw materials of the Republic of Kazakhstan

Investigation of Pozzolan Activity, Chemical and Granulometric Composition of Micro- and Nanosilicon of the Bratsk Ferroalloy Plant