Abstract:crude niobium. The phase composition of sublimates formed during the first remelting of crude niobium is studied by scanning electron microscopy and X-ray microanalysis. Sublimates typically form structures of two types, i.e., dendritic and lamellar that is connected with niobium refining process conditions and the effect of various factors on sublimate crystallization. Niobium electron beam remelting sublimates are inconsistent with respect to both chemical and phase compositions. A layered structure is typical for the porous part of sublimates that are the basis of the material. The microstructure of another type is dendritic, typical for lamellar and rounded particles with a metallic sheen located within pores or dispersed in the layered part of sublimates. Alternation of phases within each layer is noted for a layered structure. The composition of the phases containing niobium is close to NbAl3 and a solid solution based on niobium (more than 90% Nb). Within the zone of phases consisting of aluminum, there are areas accumulating iron and silicon of variable composition that may be attributed to solid solutions based on Al5FeSi and Al3Fe. The structure of the metallized part of the sublimates consists of light rounded dendrites of niobium aluminide NbAl3, between which there is a phase close in composition to Al8Fe2Si. It is noted that single particles of pure niobium metal are found within the structure of the metallized part of sublimates. It is noted that as expected the main phase is NbAl3 intermetallic. Niobium is also present in the form of silicide Nb5Si3. Aluminum is found in sublimates in elemental form, in solid solution with iron and silicon, or in the form of oxide. Impurity elements are distributed between an oxide phase based on α –Al2O3 (Fe, Si, Ni) and Al–Fe–Si (Cr, Mn, Ni) solid solution.

Study of the Microstructure and Phase Composition of Crude Niobium Electron-Beam Remelting Sublimates

Purification of Niobium by Electron Beam Melting

Atomic models of the structure of niobium silicides in Nb–Si in situ composites

Precipitation behavior in a Nb-5W-2Mo-1Zr niobium alloy fabricated by electron beam selective melting

Crystalline phases found in rapidly quenched Ni-Nb-Zr alloys

Experimental study on phase relations in the Al-Mo-Nb ternary system

In-situ Synchrotron X-Ray Photoelectron Spectroscopy Study of Medium-Temperature Baking of Niobium for SRF Application

Microstructure of the Nb-Si Based Multicomponent Alloy by Electromagnetic Cold Crucible Directional Solidifcation

Study of Physicochemical Characteristics of Niobium-Containing Oxide Materials. Part 1. Thermodynamic Simulation

Niobium alloy electron beam surface cladding silicide coating crack control

Synthesis of Niobium-Alumina Composite Aggregates and Their Application in Coarse-Grained Refractory Ceramic-Metal Castables

Systematic study of niobium thermal treatments for superconducting radio frequency cavities employing X-ray photoelectron spectroscopy

The study of constitutional phases in a Ni47Ti44Nb9 shape memory alloy

Precipitates in the Casting Microstructure of Nb-containing Silicon Steel

Morphological Evolution Of Nbc Particles At The Interface Of Niobium-Iron Diffusion Couple

The investigation of microstructure evolution, deformation behavior and processing performance of the high niobium containing TiAl alloys

Morphological Evolution of Primary Β-Nb5si3 Phase in Nb-Mo-Si Alloys

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

Atomic Structure Evolution During Solidification of Liquid Niobium from Ab Initio Molecular Dynamics Simulations.

Substrate mediated nitridation of niobium into superconducting Nb2N thin films for phase slip study

Investigating the "Cocoon Effect" in Niobium-Copper Alloy: Metallic Nano-Precipitate Distribution and Niobium Migration