Abstract:The residual stress reductions of metals enabled by external field treatments are of high industrial significance, such as pulsed magnetic treatment (PMT) and coupled electromagnetic treatment (CET). There still exist sophisticated issues regarding process comparison and mechanism. In the present work, both the PMT and the CET were used to reduce the residual stress in P10 carbide tools. Besides residual stress measurements and microscopic observations of dislocations in the tested tools, a new model for modelling dislocation interactions in the treated tools was developed to reveal more complex mechanisms of the microstructural changes induced by the external fields. The results obtained with the X-ray diffraction method demonstrated a 30% stress reduction with the PMT and a 65% reduction with the CET. The dislocation morphology observed with a Transmission Electron Microscope was examined on their characteristics, quantity, and distribution. It was suggested that the WC phase with the dislocation of multiple quantities and wide distribution could be obtained easily through the CET. Deformation displacements and directions, internal stresses and volume strains, calculated using a transient 3D model with COMSOL (Multiphysics software), were compared. It was quantitatively confirmed that the internal stress produced both the PMT and the CET could force the dislocation to move. Compared with the PMT, there was a mutation phenomenon of the stress magnitude and direction during the CET, which was more conducive to the dislocation multiplication and dislocation interaction. The proposed Opposite Sign Parallel Dislocation Interaction Model also showed that the interactions between dislocations could effectively reduce the lattice distortion at the severe distortion area of the dislocations. The study showed that the residual stress could be effectively reduced by the evenly enhanced dislocation stretching and compression asymmetry after dislocation multiplication.

The combined magnetic-vibration stress relief

Research On High-Frequency Vibratory Stress Relief For Small Assembly

Mechanism and Experimental Research on High Frequency Vibratory Stress Relief

Microscopic Mechanism of the Combined Magnetic-Vibration Treatment for Residual Stress Reduction

Vibration Stress Relief Mechanism and Its Impact on Fatigue Life

Effect of Combined Magnetic-Vibration Treatment on Residual Stress and Macroscopic Properties of Silicon Steel

Research on High-Frequency Vibratory Stress Relief of Small Cr12mov Quenched Specimens

Investigation of the mechanism for reduction of residual stress through magnetic-vibration stress relief treatment

Research and Development of Vibratory Stress Relief

Research On Magnetic-Vibration Combination Treatment Based On Multifield Coupled Finite Element Analysis

Micromechanism of Residual Stress Reduction by Low Frequency Alternating Magnetic Field Treatment

Study on the Relation of Magnatostriction and Residual Stress Relief in the Process of Magnetic Treatment

Evaluation of Effect of Magnetostriction on Residual Stress Relief by Pulsed Magnetic Treatment

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Residual Stress Reduction by Combined Treatment of Pulsed Magnetic Field and Pulsed Current

Micro-mechanism Model of Residual Stress Relaxation in Steels by Magnetic Treatment

Recent development of reduction of residual stress in steel by magnetic treatment

Residual stress reductions of carbide cutting tools through applying pulsed magnetic field and coupled electromagnetic field – mechanism analysis and comparison study

Achieving Stress Relief in Martensitic Stainless Steel Via High-Density Pulsed Electric Current Treatment