Abstract:In this paper, the combined magnetic-vibration treatment purposed to reduce residual stress is evaluated. In combination with the single magnetic and vibration treatment, a comparison is performed after stress reduction in terms of the reduction effect, macroscopic properties, and metal properties of the material. According to the experimental results, different treatment methods can reduce the residual stress. Besides, the longitudinal residual stress was reduced more significantly than the transverse residual stress, and the combined magnetic-vibration treatment performed significantly better in reducing residual stress than either vibration or magnetic alone. After the adjustment of different treatments, the tensile strength showed a slight reduction, but the elongation was improved, with the mechanical properties reaching the optimum level after the combined magnetic-vibration treatment. The conductivity was improved, and the combined magnetic-vibration treatment led to a significant improvement. After the vibration and magnetic treatment were adjusted, the hardness was basically unchanged, despite a significant improvement of hardness after the combined magnetic-vibration treatment. The magnetic performance was improved after the adjustment of different treatment, and the combined magnetic-vibration treatment led to a significant improvement. The metallographic results show that the reduction of precipitated phases and the narrowing of grain boundaries caused by using different control methods may be the main influencing factors in the properties of the material. Moreover, after the combined magnetic-vibration treatment, there were more significant changes in the reduction of precipitated phases and the narrowing of grain boundaries.

Recent development of reduction of residual stress in steel by magnetic treatment

Reducing Residual Stresses in Engineering Structures by Pulsed Magnetic Treatments

Improving Material Properties with Magnetic Treatment

Micro-mechanism Model of Residual Stress Relaxation in Steels by Magnetic Treatment

Micromechanism of Residual Stress Reduction by Low Frequency Alternating Magnetic Field Treatment

Application of pulsed magnetic field treatment for residual stress reduction of welded structure

Effect of magnetic field direction during magnetic treatment to reduce residual welding stresses

STUDY ON THE RELATIONSHIP BETWEEN MAGNETIC FIELD AND RESIDUAL STRESS IN STEEL MATERIALS

Investigation of the mechanism for reduction of residual stress through magnetic-vibration stress relief treatment

Study on the Relation of Magnatostriction and Residual Stress Relief in the Process of Magnetic Treatment

RESEARCH ON INFLUENCE OF MAGNETIC TREATMENT ON THE DISTRIBUTION OF WELDING RESIDUAL STRESS OF LOW CARBON STEEL

The combined magnetic-vibration stress relief

Residual Stress Reduction by Combined Treatment of Pulsed Magnetic Field and Pulsed Current

Effect of a pulsed magnetic treatment on the dislocation substructure of a commercial high strength steel

Microscopic Mechanism of the Combined Magnetic-Vibration Treatment for Residual Stress Reduction

Achieving Stress Relief in Martensitic Stainless Steel Via High-Density Pulsed Electric Current Treatment

Dynamic Magnetostrictive Behavior of Ferromagnetic Metal

Study on Improving the Service Life of Drill Rods by Magnetic Treatment

Evaluation of Effect of Magnetostriction on Residual Stress Relief by Pulsed Magnetic Treatment

Effect of Combined Magnetic-Vibration Treatment on Residual Stress and Macroscopic Properties of Silicon Steel

Improving Corrosion Resistance of Low Carbon Steel Welded Joint by Magnetic Treatment