Abstract:High-nickel layered ternary cathode coupling with Si-based anode is one of the most promising strategies to realize high-energy-density batteries for power electric vehicles. However, undesired interfacial instability on both sides of cathode and anode causes continuous parasitic reactions and phase transformations, and results in fast degradation of the batteries. To address this issue, herein, in-situ reliable, compact and ionically conductive interface films are constructed effectively on both LiNi0.6Co0.2Mn0.2O2 (NMC622) cathode and SiO-C anode simultaneously by simply using a multifunctional additive, lithium difluorobis(oxalato) phosphate (LiDFBOP), due to its preferential redox reactivity then efficiently influencing the subsequent electrochemical behaviors of bulk electrolyte. These films shield the electrodes against the electrolyte attack, thus enabling long-term cycling stability and enhancing Coulombic efficiency of NMC622/SiO-C pouch cells. In addition, the highly Li-ionically conductive interphases also promote the electrode kinetics, which ensure the excellent rate capability as well as low temperature performance. The underlying interface formation mechanisms in term of specific consumption amount of additive on each electrode simultaneously are quantitatively studied by combining several complementary advanced characterizations techniques such as IC, TOF-SIMS, XPS and HRTEM etc., which not only benefit to predict the optimal addition content for cost-effective electrolyte in the actual conditions, but also validate that abundant Li-containing fluorinated inorganics and organic species regulate the microstructure and the composition of interface films, leading to enhanced ionic conductivity and intensified structure integrity, then finally contributing to the improved electrochemical performance of full pouch cells. New and in-depth insight in additive-involved interface reactions provides new opportunities for the design of rational surface films to realize high-energy batteries.

Operando Building of a Superior Interface Hybrid Film Enables Chemomechanically Durable Co-Free Ni-Rich Cathodes

Construction of Inorganic-Rich Cathode Electrolyte Interphase on Co-Free Cathodes.

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Fabrication and interfacial characterization of Ni-rich thin-film cathodes for stable Li-ion batteries

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Constructing Stable Interface Layer for Boosting High-Voltage Cycling Performance of Single-Crystal Ni-rich Cathodes

Bifunctional Self-Assembled Molecular Layer Enables Stable Ni-rich Cathodes

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Invoking Interfacial Engineering Boosts Structural Stability Empowering Exceptional Cyclability of Ni‐Rich Cathode

In situ surface engineering enables high interface stability and rapid reaction kinetics for Ni-rich cathodes

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2‖SiO-C pouch cells

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Improved Electrochemical Performance of Co-Free Ni-Rich Cathode Material for Lithium-Ion Battery Through Multi-Element Composite Modification

Consolidating the Vulnerable Interphase of Ni-Rich Layered Cathode by Multifunctional Water-Based Binder

Armoring LiNi1/3Co1/3Mn1/3O2 Cathode with Reliable Fluorinated Organic-Inorganic Hybrid Interphase Layer Toward Durable High Rate Battery