Abstract:Many deadly infectious diseases are transmitted through airborne routes in indoor environments. Far UV upper-room system combined with proper ventilation is regarded as an effective approach to disinfect airborne microorganisms. Despite the current advances in the far UV upper-room system, various types of data are still lacking to guide the efficient design and the safe operation. This study combines field air sampling, laboratory experiments and computational fluid dynamics simulations to advance the knowledge on the potential of far UV radiation for disinfection and its safety design. Our findings reveal that seven out of the eight measured room spaces are categorised as slightly polluted (1201–2000 CFU m −3 ) or polluted (>2000 CFU m −3 ). Proteobacteria and Firmicutes constitute 65.2 ± 10.6 % and 21.2 ± 5.68 % of the bacterial composition in congregate settings, respectively. Ultraviolet radiation proves effective in deactivating pathogenic microorganisms, characterized by a decay rate constant ranging from 0.0446 m 2 J −1 to 0.464 m 2 J −1 , depending on the wavelength and the type of pathogenic microorganisms. The time response of Ultraviolet radiation is up to 12 min to achieve 92.1 % sterilisation. Despite the reduction in the sterilisation ratio of Ultraviolet radiation, maintaining a high ventilation rate is highly recommended to eliminate genetic material from pathogenic microorganisms. When the excimer lamp is installed higher than 1.9 m above the floor level, the radiation intensities at both standing and sitting height become lower than the safety threshold value of 0.166 W m −2 . A combination of UV radiation at 222 nm and ventilation is effective for neutralising both gram-positive and -negative bacteria and can contribute to stop the spread of infectious diseases in congregate settings.

Modelling of radiation and flow fields in in-duct ultraviolet germicidal irradiation systems with and without ribs

Rib-induced eddies increase inactivation efficiency and air handling capacity of in-duct ultraviolet germicidal irradiation systems with low energy cost

Numerical Verification for a New Type of UV Disinfection Reactor

Minimizing the exposure of airborne pathogens by upper-room ultraviolet germicidal irradiation: an experimental and numerical study

Predicting spatial distribution of ultraviolet irradiance and disinfection of exhaled bioaerosols with a modified irradiance model

Experimental evaluation of a full-scale in-duct UV germicidal irradiation system for bioaerosols inactivation

Bacterial inactivation effect of UV in aquaculture recirculating water

Effect of ventilation strategy on performance of upper-room ultraviolet germicidal irradiation (UVGI) system in a learning environment

Effects of Distance, Temperature, and Relative Humidity on the Irradiance of Ultraviolet‐C Germicidal Lamp: A Quantitative Study

Mathematical Modeling the Irradiance of Multiple Upper-Room Ultraviolet Germicidal Fixtures for Airborne Pathogens Disinfection

Experimental and numerical study on upper-room Far-UVC system under different ventilation schemes to disinfect airborne microorganisms in indoor environments

Capacity Models and Transmission Risk Mitigation: An Engineering Framework to Predict the Effect of Air Disinfection by Germicidal Ultraviolet Radiation

Numerical and experimental study on airborne disinfection by negative ions in air duct flow

Predicting airborne coronavirus inactivation by far-UVC in populated rooms using a high-fidelity coupled radiation-CFD model

Investigations of the UVC 222 NM air cleaning system in an air-conditioned room

Evaluation of an Air Cleaning Device Equipped with Filtration and UV: Comparison of Removal Efficiency on Particulate Matter and Viable Airborne Bacteria in the Inlet and Treated Air

Far-UVC disinfection of airborne and surface virus in indoor environments: Laboratory experiments and numerical simulations

Air cleaner prototype: Reduction of airborne viruses and effects of UV-C irradiation on virus concentration and RNA copy numbers considering modeled residence times and doses

Estimating the Fluence Delivery in UV Disinfection Reactors Using a ‘Detector-Model’ Combination Method

Estimation of the UV susceptibility of aerosolized SARS-CoV-2 to 254 nm irradiation using CFD-based room disinfection simulations

Efficiency improvement of a flow-through water disinfection reactor using UV-C light emitting diodes