Abstract:Respiratory diseases propagated by droplet-based transmission are a serious public health hazard, leading, in extreme cases, to pandemics such as influenza and the recent Coronavirus outbreak. Droplet infectiousness evolves in response to the environment in such a way that it decreases with time and distance from the source. Droplets can also be treated with ultraviolet germicidal irradiation (UVGI) to accelerate the reduction in their survival rate. In addition, airflow management and furnishings in public spaces can be optimised to reduce exposure to expelled droplets. This introduces a role for engineered medical interventions based on precise modelling of the time evolution of droplet infectiousness. However, information is lacking on computational fluid dynamics (CFD) simulations of the time evolution of droplet infectiousness when exposed to both evaporation and UVGI at the same time. Therefore, in this study, we developed and presented algorithms for tracking droplet infectiousness in a CFD simulation. The variations of droplets' infectiousness were investigated through the combination of parameters describing humidity and temperature, as well as the deployment of UVGI in confined public space environments. We have shown that, for airborne droplets, increased temperature leads to decreased infectiousness in propagation lengths and entrainment time, while increased humidity leads to increased infectiousness propagation lengths and entrainment times. Smaller droplets with diameters ≤ 110 μm remain entrained longer in the air, whereas droplets with a diameter ≥ 140 μm travel in the air stream for a relatively short time before falling to a surface due to gravity, depending on the specific relative humidity (RH) and temperature conditions. Thus, our data suggest that infectiousness of droplets is substantially reduced due to the influence of evaporation, and it is further decreased when exposed to UV irradiance. We also show that, due to the combined influence of UVGI and evaporation conditions, the infectiousness of droplets decreased faster. Our model can track droplet infectiousness, thus helping to understand how the spread of infectious droplets is reduced in a confined environment.

Predicting spatial distribution of ultraviolet irradiance and disinfection of exhaled bioaerosols with a modified irradiance model

Minimizing the exposure of airborne pathogens by upper-room ultraviolet germicidal irradiation: an experimental and numerical study

Far-UVC disinfection of airborne and surface virus in indoor environments: Laboratory experiments and numerical simulations

Predicting airborne coronavirus inactivation by far-UVC in populated rooms using a high-fidelity coupled radiation-CFD model

Experimental and numerical study on upper-room Far-UVC system under different ventilation schemes to disinfect airborne microorganisms in indoor environments

Human exposure to air contaminants under the far-UVC system operation in an office: effects of lamp position and ventilation condition

Temporal and spatial far-ultraviolet disinfection of exhaled bioaerosols in a mechanically ventilated space

Mathematical Modeling the Irradiance of Multiple Upper-Room Ultraviolet Germicidal Fixtures for Airborne Pathogens Disinfection

Improved estimates of 222 nm far-UVC susceptibility for aerosolized human coronavirus via a validated high-fidelity coupled radiation-CFD code

Investigations of the UVC 222 NM air cleaning system in an air-conditioned room

Effect of ventilation strategy on performance of upper-room ultraviolet germicidal irradiation (UVGI) system in a learning environment

Turn Up the Lights, Leave them On and Shine them All Around—Numerical Simulations Point the Way to more Efficient Use of Far‐UVC Lights for the Inactivation of Airborne Coronavirus

Modelling of radiation and flow fields in in-duct ultraviolet germicidal irradiation systems with and without ribs

Estimation of the UV susceptibility of aerosolized SARS-CoV-2 to 254 nm irradiation using CFD-based room disinfection simulations

Infectiousness model of expelled droplets exposed to ultraviolet germicidal irradiation coupled with evaporation

Eulerian-Lagrangian modelling of bio-aerosols irradiated by UV-C light in relation to SARS-CoV-2 transmission

Experimental evaluation of a full-scale in-duct UV germicidal irradiation system for bioaerosols inactivation

Optimizing indoor air quality: CFD simulation and novel air cleaning methods for effective aerosol particle inhibition in public spaces

Capacity Models and Transmission Risk Mitigation: An Engineering Framework to Predict the Effect of Air Disinfection by Germicidal Ultraviolet Radiation

Modelling of human exhaled sprays and aerosols to enable real-time estimation of spatially-resolved infection risk in indoor environments

Effects of Distance, Temperature, and Relative Humidity on the Irradiance of Ultraviolet‐C Germicidal Lamp: A Quantitative Study