Abstract:In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m3. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model's capability in describing the real working conditions of the heave tunnel.

Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production

Investigation of efficient dust control strategy for construction tunnels: Ventilation System's implications for cleaner production

CFD Simulations of Air Curtain Dust Removal Effect by Ventilation Parameters During Tunneling

Study of highly efficient control and dust removal system for double-tunnel boring processes in coal mines

CFD-based simulation study of dust transport law and air age in tunnel under different ventilation methods

Comparative study of dust pollution and air quality of tunnelling anchor integrated machine working face with different ventilation

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata

The optimization of a dust suppression and clean production scheme in a TBM-constructed tunnel based on an orthogonal experiment

The control effect of 3D spiral wind-curtain generator on respirable dust pollution during tunnelling process

Distribution characteristics of an airflow–dust mixture and quantitative analysis of the dust absorption effect during tunnel sub-regional coal cutting

Study of dust pollution control effect based on orthogonal test and CFD numerical simulations

Diffusion characteristics of coal dust associated with different ventilation methods in underground excavation tunnel

Evolutionary analysis of dust pollution in the comprehensive excavation face based on linear regression method

Optimization of dust removal performance of ventilation system in tunnel constructed using shield tunneling machine

Study on the coupling pollution law of dust and gas and determination of the optimal purification position of air duct during tunnel excavation

Analysis and comparison of airflow-respirable dust control and innovative ventilation environment in drilling construction tunnels

Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

Study of integrated vortex ventilation and dust removal system in mechanized excavation face

Research and Development of Virtual Prototype for Intelligent Control of Airflow Field in Fully Mechanized Heading Face

Study on CO migration characteristics after blasting in tunnel under different ventilation methods

Ventilation system arrangement in large cross-section tunnels：a CFD simulation based on direct initial concentration assessment