Abstract:In view of the current situation where research on the dust diffusion laws of different dust source points is limited and the gap with the actual field situation is too large; this study employs an innovative gas–liquid–solid triphase coupling method to investigate how dust moves and spreads in the fully mechanized excavation face 431305 at the Liangshuijing Mine; focusing on both the dust field and the dust–fog coupled field. The results indicate that using the long-pressure short-suction ventilation method; dust movement in the roadway is primarily influenced by the airflow; which can be classified into vortex; jet; and return flow regions. The analysis reveals that different dust source points affect dust distribution patterns. Dust source 1 generates the highest dust concentration; primarily accumulating on the duct side and return air side of the roadway. By contrast; dust source 2's dust mainly gathers at the heading and the front of the cutting head. Dust sources 3 and 4 show lower dust concentrations near the top of the roadway. Dust source 5 achieves the most effective dust removal; aided by airflow and a suction fan; showcasing superior dust performance. A comprehensive comparison indicates that dust source 1 has the highest overall dust concentration. Therefore; further simulation of the distribution law of dust generated at dust source 1 under the action of water mist reveals that the dust concentration near the heading face is reduced from 2000 mg/m3 under the action of single air flow to about 1100 mg/m3. At t = 5 s; the spray droplets almost cover the entire tunneling face; leading to a significant decrease in dust concentration within 10–25 m from the tunneling face. Within 40 s; both coal dust and spray droplets are significantly reduced. The field measurement results verify the accuracy of the simulation results and provide certain guidance for promoting the sustainable development of the coal industry.

Study on the coupling pollution law of dust and gas and determination of the optimal purification position of air duct during tunnel excavation

Study on dust–gas coupling pollution law and selection of optimal purification distance of air duct during tunneling process

Study of spatiotemporal evolution of coupled airflow-gas-dust multi-field diffusion at low-gas tunnel

Coupled diffusion law of windflow-gas-dust in tunnel energy extraction processes and the location of optimal pollution control exhaust duct

Comparative study of dust pollution and air quality of tunnelling anchor integrated machine working face with different ventilation

Analysis of the dust–methane two-phase coupling blowdown effect at different air duct positions in an excavation anchor synchronous tunnel

Numerical Simulation Study of Gas–Liquid–Solid Triphase Coupling in Fully Mechanized Excavation Faces with Variation in Dust Source Points

Evolutionary analysis of dust pollution in the comprehensive excavation face based on linear regression method

Investigation of efficient dust control strategy for construction tunnels: Ventilation System's implications for cleaner production

CFD-based simulation study of dust transport law and air age in tunnel under different ventilation methods

Analysis of a double-pressure double-extraction (DPDE) control dust removal system and optimal installation position of an air curtain generator

Study of the Diffusion Law of Harmful Gases in Tunnel Construction on Plateaus and Optimization of Ventilation Parameters.

Study on Dust Movement in Long Tunnel during Blasting Period

Numerical Simulation Study of Dust Concentration Distribution Regularity in Cavern Stope

Study of dust pollution control effect based on orthogonal test and CFD numerical simulations

Study on multiple influence mechanism of airflow-dust-gas coupling diffusion under large vortex flow technology.

Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production

Distribution characteristics of an airflow–dust mixture and quantitative analysis of the dust absorption effect during tunnel sub-regional coal cutting

Diffusion characteristics of coal dust associated with different ventilation methods in underground excavation tunnel

Determining the optimal airflow rate to minimize air pollution in tunnels

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata