Abstract:In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m3. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model's capability in describing the real working conditions of the heave tunnel.

Evolutionary analysis of dust pollution in the comprehensive excavation face based on linear regression method

Study on the coupling pollution law of dust and gas and determination of the optimal purification position of air duct during tunnel excavation

Impact analysis of dust evolution pattern and determination of key ventilation parameters in highland highway construction tunnels

Comparative study of dust pollution and air quality of tunnelling anchor integrated machine working face with different ventilation

Study of spatiotemporal evolution of coupled airflow-gas-dust multi-field diffusion at low-gas tunnel

Numerical simulation and field test of dust control effect of exhaust ventilation in fully mechanized face

Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

Study on temporal and spatial evolution law for dust pollution in double roadway ventilation system of short wall continuous mining face

Dust diffusion laws during partition excavation by boom-type roadheader in a metro tunnel

Analysis of a double-pressure double-extraction (DPDE) control dust removal system and optimal installation position of an air curtain generator

Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production

Study on dust distribution in a highway tunnel during the full-face excavation with Drilling-Blasting method

Numerical Simulation Study of Gas–Liquid–Solid Triphase Coupling in Fully Mechanized Excavation Faces with Variation in Dust Source Points

Study of dust pollution control effect based on orthogonal test and CFD numerical simulations

CFD-based simulation study of dust transport law and air age in tunnel under different ventilation methods

Coupled diffusion law of windflow-gas-dust in tunnel energy extraction processes and the location of optimal pollution control exhaust duct

Spatiotemporal migration of dust pollution during the tunnel mucking process and development of dust removal trolley based on computational fluid dynamics technology

Investigation of efficient dust control strategy for construction tunnels: Ventilation System's implications for cleaner production

Study on dust–gas coupling pollution law and selection of optimal purification distance of air duct during tunneling process

Experimental study on the influence of longitudinal slope on airflow-dust migration behavior after tunnel blasting

Influence of mixed ventilation on particulate-gas diffusion and distribution of diesel engine exhaust in fully mechanized excavation face