Abstract:Stimulated emission light in photonic devices on nano-scales is a challenging step to meet the requirements for optoelectronic integrations.[1] In the past decade, tremendous achievements in the fabrication of semiconductor lasers based on photonic crystals, microdisks, ring cavities and the Fabry-Pérot (F-P) cavity have been achieved.However, their size has reached a bottleneck because of the diffraction limit of light when the dielectric medium approach the value of wavelength (λ/2n).[2-4]One of the most promising approaches for realizing a sub-wavelength nanosized laser with a low threshold relies on the principle of the surface plasmon amplification of stimulated emission of radiation (SPASER).[5][6][7] In this study, Ⅲ-Nitride-based plasmonic nanolaser with hybrid metal-oxide-semiconductor (MOS) structures is designed based on the principle of surface plasmon amplification by the stimulated emission of radiation (SPASER).[7-9]Through a finite-difference time-domain (FDTD) simulations and eigenmode (MODE) simulations, triangular, hexagonal, cylinder and elliptical nanorods structures are simulated and analysed.The relationship between the geometry of the NRs and the plasmonic/photonic lasing modes was discussed.Finally, plasmonic nanolaser is fabricated by nanoimprint lithography and microfabrication.The photoluminescence (PL) spectra of the designed structure are recorded as a function of the optical pumping power density in a micro-PL system excited by a 325-nm He-Cd laser.The fabricated nanolasers are able to demonstrate lasing behaviour with an optical pumping power density as low as 0.3 kW/cm 2 at room temperature and a quality Q~factor of up to about 120.The low lasing threshold is attributed to the SPP coupling-induced strong electric field confinement in the MOS structures and optimization of MOS structure.In accordance with the theoretical and experimental results, the size and shape of the nanorod (NR) are key for the lasing modes and reduction in loss.We believe geometrical and technical optimization can further enhance the lasing properties.These achievements should extend the size range of lasers to the subwavelength scale and allow hybridization of their lasing modes, which could be vital for information processing applications.

Strong mode coupling-enabled hybrid photon-plasmon laser with a microfiber-coupled nanorod

Hybrid Photon-Plasmon Nanowire Lasers

Microlaser based on a hybrid structure of a semiconductor nanowire and a silica microdisk cavity.

Single-Nanorod Plasmon Nanolaser: A Route Toward A Three-Dimensional Ultraconfined Lasing Mode

Single-mode Nanolasers Based on FP-WGM Hybrid Cavity Coupling.

Strong coupling of a plasmonic nanoparticle to a semiconductor nanowire

Single-Band 2-Nm-line-width Plasmon Resonance in a Strongly Coupled Au Nanorod.

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

Dye Gain Gold NW Array of Surface Plasmon Polariton Waveguide

Output Coupling of Perovskite Lasers from Embedded Nanoscale Plasmonic Waveguides

All-Dielectric Nanolaser with Subnanometer Field Confinement

Sub-λ Plasmon Laser

Novel graphene enhancement nanolaser based on hybrid plasmonic waveguides at optical communication wavelength

Low-Threshold Multiwavelength Plasmonic Nanolasing in an "H"-Shape Cavity

Plasmonic Nano-Laser below the Diffraction Limit

Semiconductor Plasmon Laser

Plasmonic Laser Using InGaN/GaN Nanorods with Different Shapes

Lasers: Manipulable and Hybridized, Ultralow‐Threshold Lasing in a Plasmonic Laser Using Elliptical InGaN/GaN Nanorods (adv. Funct. Mater. 37/2017)

Plasmonic and Photonic Lasers Based on Semiconductor Nanowires: Low-loss and High Mode-tunablity

Photonic Nanolaser with Extreme Optical Field Confinement

InGaN/GaN Nanorod Arrays for a Hybrid Nanolaser