Abstract:By boosting the emission strength by a factor of 100, a new hybrid photonic‒plasmonic architecture is successfully demonstrated to realize low‐threshold room‐temperature UV nanolasers that can be monolithically integrated into silicon. The synergistic engineering of the metal‒semiconductor heterojunction, the modal reflectivity, and the intermodal coupling engender the realization of electrically driven nanolasers. The metal‒semiconductor heterojunction is imperative for the realization of electrically driven nanolasers for chip‐level platforms. Progress in developing such nanolasers has hitherto rarely been realized, however, because of their complexity in heterojunction fabrication and the need to use noble metals that are incompatible with microelectronic manufacturing. Most plasmonic nanolasers lase either above a high threshold (101‒103 MW cm−2) or at a cryogenic temperature, and lasing is possible only after they are removed from the substrate to avoid the large ohmic loss and the low modal reflectivity, making monolithic fabrication impossible. Here, for the first time, record‐low‐threshold, room‐temperature ultraviolet (UV) lasing of plasmon‐coupled core‒shell nanowires that are directly grown on silicon is demonstrated. The naturally formed core‒shell metal‒semiconductor heterostructure of the nanowires leads to a 100‐fold improvement in growth density over previous results. This unprecedentedly high nanowire density creates intense plasmonic resonance, which is outcoupled to the resonant Fabry‒Pérot microcavity. By boosting the emission strength by a factor of 100, the hybrid photonic‒plasmonic system successfully facilitates a record‐low laser threshold of 12 kW cm−2 with a spontaneous emission coupling factor as high as ≈0.32 in the 340‒360 nm range. Such architecture is simple and cost‐competitive for future UV sources in silicon integration.

Low-Threshold Multiwavelength Plasmonic Nanolasing in an "H"-Shape Cavity

Hybrid Photon-Plasmon Nanowire Lasers

Single-mode Nanolasers Based on FP-WGM Hybrid Cavity Coupling.

Single-Nanorod Plasmon Nanolaser: A Route Toward A Three-Dimensional Ultraconfined Lasing Mode

Room-Temperature Low-Threshold Plasmonic Nanolaser through Mode-Tailoring at Communication Wavelengths

Tunable Artificial Plasmonic Nanolaser with Wide Spectrum Emission Operating at Room Temperature

Fiber-Integrated Reversibly Wavelength-Tunable Nanowire Laser Based on Nanocavity Mode Coupling.

Low-Threshold Nanolaser Based on Hybrid Plasmonic Waveguide Mode Supported by Metallic Grating Waveguide Structure

Two‐Photon Pumped Wavelength‐Tunable Single‐Mode Plasmonic Nanolaser with Ultralow Threshold

Novel SPP Nanolaser with Two Modes of Electromagnetic for Optoelectronic Integration Device

Plasmonic and Photonic Lasers Based on Semiconductor Nanowires: Low-loss and High Mode-tunablity

On‐Chip Monolithically Integrated Ultraviolet Low‐Threshold Plasmonic Metal‒Semiconductor Heterojunction Nanolasers

Wavelength Tunable Plasmonic Lasers Based on Intrinsic Self-Absorption of Gain Material

A merged lattice metal nanohole array based dual-mode plasmonic laser with an ultra-low threshold

Design of an Ultrafast Plasmonic Nanolaser for High-Intensity Broadband Emission Operating at Room Temperature

A Room Temperature Low-Threshold Ultraviolet Plasmonic Nanolaser

Lasers: Manipulable and Hybridized, Ultralow‐Threshold Lasing in a Plasmonic Laser Using Elliptical InGaN/GaN Nanorods (adv. Funct. Mater. 37/2017)

Surface-Plasmon-Polariton Laser Based on an Open-Cavity Fabry-Perot Resonator

Low-threshold Lasing in a Plasmonic Laser Using Nanoplate InGaN/GaN

Plasmonic Nanolasers: Pursuing Extreme Lasing Conditions on Nanoscale

All-color Plasmonic Nanolasers with Ultralow Thresholds: Autotuning Mechanism for Single-Mode Lasing.