Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Boiling-induced thermal degradation of copper inverse opals and its mitigation

Enhanced Capillary‐Fed Boiling in Copper Inverse Opals via Template Sintering

Design and optimization of well-ordered microporous copper structure for high heat flux cooling applications

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

Boiling-induced surface aging and crystallization fouling of functionalized smooth and laser-textured copper interfaces

Key factors affecting the boiling heat transfer coefficient of FC-72 in saturated pool boiling using lotus-type porous copper

Pool boiling heat transfer: Thermal performance for alternating and extended operational conditions

Effect of electro-thermal diffusion induced deterioration on the failure mechanism of Pd-Au-coated Cu wires

Unveiling the Degradation Mechanism of High-Temperature Superconductor Bi2Sr2CaCu2O8+δ in Water-Bearing Environments

Study on Creep-Fatigue Life of ODS-Cu As Heat Sink in Divertor PFU

Heat transfer coefficient and pressure drop of water flow boiling in porous open microchannels heat sink

Pool boiling heat transfer of dual-scale porous microchannel for high-power electronics cooling

Pool Boiling Performance of Multilayer Micromeshes for Commercial High-Power Cooling

Enhancement of pool boiling heat transfer by laser texture-deposition on copper surface

Experimental Study on the Flow Boiling (Two-Phase) Heat Transfer of High-Density Micro-/Nano-Porous Copper-Alumina-Copper Nano-composite-Coated Surfaces

Scalable capillary-pin-fin structure enabled efficient flow boiling

Hybrid Surfaces with Capillary Wick and Minichannels for Enhancement of Phase-Change Immersion Cooling of Power Electronics

Boiling Heat Transfer with a Well-Ordered Microporous Architecture

Copper-Graphene Foams: A New High-Performance Material System for Advanced Package-Integrated Cooling Technologies

Estimating temperature-dependent thermal conductivity of copper oxide using an inverse method