Abstract:Oxide formation on metallic heat transfer surfaces poses a risk parameter in high-power thermal systems maintained by multi-phase cooling. In spite of the significance for practical applications, the potential change in chemistry and morphology on the surfaces exposed to continuous or alternating boiling process plays a vital role in heat transfer efficiency. In this comprehensive study, the effect of heat flux rate, boiling crisis, operation time, surface roughness, and pre-oxidation by the system calibration on oxide layer formation and its inevitable effect on boiling heat transfer (BHT) have been evaluated separately. A sort of experimental scenarios rather representing real operating conditions encountered in phase-change cooling apparatuses were carried out on smooth and rough copper substrates in saturated de-ionized water at atmospheric pressure. In order to practice the scenarios, a series of subsequent critical heat flux (CHF) runs and continuous boiling operations at certain heat flux levels ranging between 15 and 60 W/cm 2 were performed within different numbers and sequences as a part of the Design of Experiments (DOE). Each operating scenario was analyzed and compared individually, while questions regarding the effect of the number of CHF runs, heat flux level during long-term operation, surface roughness, pre-oxidation, and rigorous long-term stability operation on boiling heat transfer were examined exhaustively. As a result, CHF and maximum heat transfer coefficient ( HTC ) of all surfaces exposed to boiling processes considerably enhanced at different rates corresponding to applied scenarios. The rate of heat flux level applied on heating surfaces was not determined to be a significant factor, whereas the HTC and CHF enhanced as the number of subsequent boiling crises (CHF runs) ultimately raised. On the other hand, HTC of the surface non-exposed to CHF runs demonstrated a drastic enhancement by 45% after 24 h of continuous boiling exposure at 45 W/cm 2 compared to initial performance with 1.0 W/cm 2 K. The heat transfer from the surfaces exposed to extended long-term operations showed a final stable thermal behavior, while CHF values doubled from an initial value of approximately ∼73 W/cm2 to 144.7 W/cm 2 as exposure time increased. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and scanning electron microscope (SEM) analyses were executed to evaluate the influence of micro-nano-scale oxide particles/layers developed on the heater surfaces and to interpret the changes in heat transfer performance.

Boiling-induced surface aging and crystallization fouling of functionalized smooth and laser-textured copper interfaces

Nanosecond Laser-Textured Copper Surfaces Hydrophobized with Self-Assembled Monolayers for Enhanced Pool Boiling Heat Transfer

Pool Boiling Heat Transfer During Quenching on a Superhydrophilic Surface in Dilute Aqueous Saline Solutions: Effects of the Solution Concentration and Type of Salts

Mechanisms for Enhanced Transition Boiling During Quenching on a Superhydrophilic Surface As Revealed by in Situ Characterization on the Solid-Liquid Contact Using Electrochemical Impedance Technique

Hydrophilic and Hydrophobic Nanostructured Copper Surfaces for Efficient Pool Boiling Heat Transfer with Water, Water/Butanol Mixtures and Novec 649

Laser-Engineered Microcavity Surfaces with a Nanoscale Superhydrophobic Coating for Extreme Boiling Performance

Elucidating the effects of surface wettability on boiling heat transfer using hydrophilic and hydrophobic surfaces with laser-etched microchannels

Effect of Surface Wettability on Nanoparticle Deposition during Pool Boiling on Laser-Textured Copper Surfaces

Femtosecond laser-treated copper sintering surface to enhance pool boiling heat transfer

Enhancement of pool boiling heat transfer by laser texture-deposition on copper surface

Effects of surface oxides and nanostructures on the spontaneous wettability transition of laser-textured copper surfaces

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Corrosive Effect on Saturated Pool Boiling Heat Transfer Characteristics of Metallic Surfaces with Hierarchical Micro/Nano Structures

Surface Modification Utilizing Photolithography Process for Pool Boiling Enhancement: An Experimental Study

Pool boiling heat transfer: Thermal performance for alternating and extended operational conditions

Surface modifications for phase change cooling applications via crenarchaeon Sulfolobus solfataricus P2 bio-coatings

Experimental Study on the Flow Boiling (Two-Phase) Heat Transfer of High-Density Micro-/Nano-Porous Copper-Alumina-Copper Nano-composite-Coated Surfaces

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Superior Antidegeneration Hierarchical Nanoengineered Wicking Surfaces for Boiling Enhancement

Experimental study of subcooled boiling pool heat transfer and its “hook back” phenomenon on micro/nanostructured surfaces

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces