Abstract:Lamb wave resonators (LWRs) based on lithium niobate on insulator (LNOI) substrates operating in an A1 mode at frequencies above 5 GHz typically exhibit high electromechanical coupling coefficients (K2) ranging from 20% to 30%. This makes them promising candidates to replace current bulk acoustic wave technology in next-generation broadband RF filters. However, the K2 of conventional LWRs still struggles to meet application requirements for bandwidths exceeding 1 GHz, such as WiFi-6E. This paper presents an analytical optimization approach for rapid and comprehensive scanning of the full 3D Euler space to find the maximum effective K2 of LWR devices. Such a full scan is difficult to achieve by the conventional time-consuming finite element method (FEM). The K2 results for a selected subset of Euler angles obtained through this analytical approach align with FEM simulation results. The optimized results show that LWRs on LNOI can achieve the highest K2 of 59.92% at Euler angles of (0, −151°, −60°), providing bandwidths exceeding 1 GHz at 5 GHz. To validate this optimization approach, LWRs with various orientations were fabricated on both 41° YX-cut and Z-cut LNOI wafers, with measured K2 values at different Euler angles agreeing well with both analytical and FEM results. The proposed K2 optimization method serves as a valuable guideline for selecting substrate cuts and device orientations in the design of ultra-broadband filters for next-generation telecommunications.

Maximum Bandwidth Analysis With a Universal AWLR‐Based Filter Structure

A novel enlarging fractional bandwidth technique for acoustic‐wave‐lumped‐element resonator‐based bandpass filters

High Electromechanical Coupling Factor Lamb Wave Resonator

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Hybrid Filter With Extremely Wide Bandwidth and High Selectivity Using FBAR Network

A Hybrid Film-Bulk-Acoustic-Resonator/Coupled-Line/Transmission-Line High Selectivity Wideband Bandpass FBAR Filter

Wide Transmission Band Rasorber of Center‐connected Pattern with Multi‐resonators

A novel wideband multi‐mode coupled resonator filter based on bulk acoustic wave technology

Hybrid Integration of BAW Resonators with an On-Chip Inductor to Improve the Stopband Rejection of the N78 Band Filter

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

A Modified Lattice Configuration Design for Compact Wideband Bulk Acoustic Wave Filter Applications

Design of Hybrid Bandpass Filter Chips with High Selectivity and Wideband Using IPD and FBAR Technology

A Low-Loss Wideband SAW Filter with Low Drift Using Multilayered Structure

Near 30% Fractional Bandwidth Surface Acoustic Wave Filters with Novel Electrode Configuration

A General Method for Implementing Flexible Filter Design Based on Nested Substrate Integrated Waveguide Circular Cavity and Cambered Cavity

An Ultra‐wideband Bandpass Filter Using Hybrid Structure of Microstrip and CPW

Bandpass Filters Utilizing Simplified Left-Handed Transmission Line Structure

Materials, Design, and Characteristics of Bulk Acoustic Wave Resonator: A Review

Synthesis of wideband bulk acoustic wave coupled resonator filter combined with lumped components