Abstract:Lamb wave resonators (LWRs) based on lithium niobate on insulator (LNOI) substrates operating in an A1 mode at frequencies above 5 GHz typically exhibit high electromechanical coupling coefficients (K2) ranging from 20% to 30%. This makes them promising candidates to replace current bulk acoustic wave technology in next-generation broadband RF filters. However, the K2 of conventional LWRs still struggles to meet application requirements for bandwidths exceeding 1 GHz, such as WiFi-6E. This paper presents an analytical optimization approach for rapid and comprehensive scanning of the full 3D Euler space to find the maximum effective K2 of LWR devices. Such a full scan is difficult to achieve by the conventional time-consuming finite element method (FEM). The K2 results for a selected subset of Euler angles obtained through this analytical approach align with FEM simulation results. The optimized results show that LWRs on LNOI can achieve the highest K2 of 59.92% at Euler angles of (0, −151°, −60°), providing bandwidths exceeding 1 GHz at 5 GHz. To validate this optimization approach, LWRs with various orientations were fabricated on both 41° YX-cut and Z-cut LNOI wafers, with measured K2 values at different Euler angles agreeing well with both analytical and FEM results. The proposed K2 optimization method serves as a valuable guideline for selecting substrate cuts and device orientations in the design of ultra-broadband filters for next-generation telecommunications.

A novel enlarging fractional bandwidth technique for acoustic‐wave‐lumped‐element resonator‐based bandpass filters

Maximum Bandwidth Analysis With a Universal AWLR‐Based Filter Structure

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact quasi-elliptic bandpass filter based on folded ridge substrate integrated waveguide (FRSIW)

Ultra‐wideband Bandpass Filter Using Half‐mode T‐septum Substrate Integrated Waveguide with Electromagnetic Bandgap Structures

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Miniaturized and High-Selectivity Substrate Integrated Waveguide (SIW) Bandpass Filter Loaded by Complementary Split-Ring Resonators (Csrrs)

A Hybrid Film-Bulk-Acoustic-Resonator/Coupled-Line/Transmission-Line High Selectivity Wideband Bandpass FBAR Filter

A Hybrid Filter With Extremely Wide Bandwidth and High Selectivity Using FBAR Network

High Electromechanical Coupling Factor Lamb Wave Resonator

Hybrid Integration of BAW Resonators with an On-Chip Inductor to Improve the Stopband Rejection of the N78 Band Filter

A novel wideband multi‐mode coupled resonator filter based on bulk acoustic wave technology

Design of Rx Filter for WCDMA Direct-Conversion Front-End Using FBAR Technology

Design of Balanced RF Filter for Wireless Applications Using FBAR Technology

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Design of Hybrid Bandpass Filter Chips with High Selectivity and Wideband Using IPD and FBAR Technology

A Modified Lattice Configuration Design for Compact Wideband Bulk Acoustic Wave Filter Applications

Wideband High Selectivity Filter Chips With Adjustable Bandwidth Based on IPD Technology

A Novel Wideband Transition from LTCC Laminated Waveguide to Air-Filled Rectangular Waveguide for W-band Applications