Abstract:Efficiently realizing laminar flow mixing of non-Newtonian fluids is a key challenge faced by conventional stirred reactors. In this study, an innovative strategy is proposed to regulate the flow pattern from radial to axial flow by changing the interface evolution of the flow field, so as to solve the problem of uneven mixing materials in laminar flow. An innovative combination of the RGB (Red, Green, Blue) brightness analysis and quantitative analysis area method was used to quantitatively describe the mixing performance of the three stirred reactor in the laminar flow. We found that the coloring area ratio of the dual shaft off-centred mixer (DSO) mixer was approximately 165.7 % and 93.8 % higher than that of the single shaft central (SSC) and single shaft off-centred mixer (SSO), respectively. Results showed that the DSO mixer can directionally adjust the stable interface of the flow field, and then obtain the ideal velocity distribution and flow pattern. Importantly, it is found that the mixer has an inherent axial mixing limit in the laminar flow. Increasing the Reynolds number can only shorten the time for the mixing system to reach the steady state, and cannot further improve the axial transport capacity of the system. Compared to the SSC and SSO systems, the DSO mixer demonstrated a reduction of nearly 20 % in overall mixing time and power consumption. Through comparative analysis of pressure distribution and Poincare cross section, the DSO mixing system can switch chaos oscillation and realize the "globally chaotic mixing" from "locally chaotic mixing". Remarkably, this work highlights the potential of DSO mixer as a simple and efficient system for laminar flow mixing applications, such as polymerization processes, biological fermentation.

Experimental investigation of the mixing efficiency via intensity of segregation along axial direction of a rotating bar reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Micromixing Simulation of Novel Large-Double-Blade Impeller

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

CFD Analysis of Flow Patterns and Micromixing Efficiency in a Y-Type Microchannel Reactor

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Experimental Investigation on Micromixing Characteristics of Coaxial Mixers in Viscous System

Microscale Mixing Efficiency of Ultrasound-assisted Synergistic Microreactors

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

A Microscopic Study on the Mixing Process of Binary Solids in Bubbling Fluidized Bed

A turbulent mass diffusivity model for analyzing the mixing characteristics in an impinging stream-rotating packed bed

Simulation of the Mixing Process in A Straight Tube with Sudden Changed Cross-Section

Hydrodynamic Intensification and Interfacial Regulation Strategy for the Mixing Process of Non-Newtonian Fluids

Investigation of effects of impeller geometry on the spatial distribution of turbulent field and micro-mixing performance in a stirred reactor equipped with multiple impellers