Abstract:slime water generally contains a large number of highly dispersed suspended particles, making solid-liquid separation difficult. Strengthening fluid mixing and particle collision by regulating turbulence is an effective way to achieve solid-liquid separation. Particle collision flocculation mostly occurs in turbulent environments where the motion of fine particles is strongly influenced by the turbulent minimum vortex scale. In this study, turbulent vortices are modulated by impinging flows to enhance the mixing of two different density suspensions and the collision of fine particles in the suspension. Two different solution models were used to simulate the mixing condition of the suspension and the distribution of the particles in the mixing drum in three dimensions. The water phase entering the mixing drum was considered as a continuous phase and the solid particles were considered as a continuous phase (suspension) or a secondary discrete phase (particles). The effects of different inlet fluid velocity ratios at different feed densities on the turbulent characteristic parameters and particle distribution in the mixing drum were analyzed. The results of the study show that the impact flow formed by the jets colliding vertically with each other can induce turbulent macro-vortices such as hairpin vortices, spanwise vortices and axial vortices. The velocity of particles moving in the turbulent macro-vortex is in the following order: Large particle size and density > Large particle size and small density > Small particle size and high density > Small particle size and density. The interaction between vortex and vortex and between vortex and the main fluid significantly increases the turbulent kinetic energy and decreases the vortex scale, resulting in a minimum scale vortex that is conducive to particle coalescence and collision; the minimum vortex scale generated in the flow field in the mixing drum is mainly smaller than the average minimum vortex scale. The minimum vortex scale tends to increase when the inlet flow rate and flow rate ratio increase from 1.258:1.87 to 1.882:1.258, independent of the inlet density. When the flow rate ratio is similar, the minimum vortex scale decreases only when the flow rate increases. An appropriate increase in the ratio of the upper and side feed flow rates helps fluid mixing and particle aggregation and collision, and the mixing density, apparent viscosity and particle coalescence are all optimal when the ratio of the upper and side feed flow rates is between 1.40 and 1.50. In addition, at the same flow rate ratio, the mixing uniformity and mixing strength are better than the case where the upper inlet feed density is greater than the side inlet feed density, which is more conducive to fluid mixing and particle collision. The study promotes slime water mixing and fine particle coalescence in mixing drums through the regulation of fluid hydraulic conditions, providing a new way of thinking about how to enhance the liquid-liquid mixing and solid-liquid separation process.

Hydrodynamic Intensification and Interfacial Regulation Strategy for the Mixing Process of Non-Newtonian Fluids

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Numerical Investigation on Intensified Mixing Performance with Modified Dual Impeller

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

An Efficient Micro-Mixer by Elastic Instabilities of Viscoelastic Fluids: Mixing Performance and Mechanistic Analysis

Enhanced Fluid Mixing Using a Novel Multi-Stage Static Pipeline Mixer: Numerical Simulation and Mechanism Analysis

Exploration of Multishafts Stirred Reactors: An Investigation on Experiments and Large Eddy Simulations for Turbulent Chaos and Mixing Characteristics

High Mixing Efficiency by Modulating Inlet Frequency of Viscoelastic Fluid in Simplified Pore Structure

Fluid Mixing in Droplet‐based Microfluidics with T Junction and Convergent–divergent Sinusoidal Microchannels

Isolated Mixing Regions and Mixing Enhancement in a High-Viscosity Laminar Stirred Tank

Study of slime water mixing process intensification using impingement flow regulation

Optimum Design of Micromixer for a Non-Newtonian Fluid by Topology Optimization

Reactive mixing performance for a nanoparticle precipitation in a swirling vortex flow reactor

Computational Fluid Dynamics Simulation and Experimental Study on Mixing Performance of a Three-Dimensional Circular Cyclone-Type Microreactor

Experimental and Computational Investigation of Chaotic Advection Mixing in Laminar Rectangular Stirred Tanks

Mixing performance of a non-Newtonian fluid in a coaxial agitated impeller reactor