Abstract:Three experimental approaches are presented to determine the mixing characteristics of a new kind of high-efficiency membrane dispersion minireactor in which microfiltration membranes are applied as the dispersion media. Residence time distribution (RTD) curves were measured for determining the macromixing characteristics. A typical Dushman reaction (iodide-iodate) coupled with a neutralization and precipitation reaction of BaSO4 were introduced to characterize the micromixing performance of a single-phase mixing process. A dye extraction method was also applied to study the micromixing performance of a two-liquid phase-mixing system. The RTD result showed that the flow performance in the minireactor was almost in the plug flow condition. The micromixing performance was expressed with a segregation index, which could be < 0.002. The single-phase micromixing performance reached the desired level. The result of precipitation of BaSO4 showed that the mixing performance had a substantial influence on the particle size and size distribution. It was found that in the single-phase mixing process the mixing performance was mainly influenced by the phase flux and the membrane pore size. With decreasing dispersed fluid flux or the membrane pore size, or with increasing continuous fluid flux, the micromixing performance was enhanced. The dye extraction method can correctly determine the mixing performance of a two-liquid phase-mixing system. Unlike the single-phase mixing process, in the two-liquid phase-mixing process there was a minimum value for the mixing efficiency with the change of the continuous or dispersed-phase flux, when the membrane pore size was > 0.9 mu m. (c) 2005 American Institute of Chemical Engineers.

CFD Analysis of Flow Patterns and Micromixing Efficiency in a Y-Type Microchannel Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Computational Fluid Dynamics Analysis of the Micromixing Efficiency in A Rotating-Packed-Bed Reactor

Characterization and modeling of micromixing performance in micropore dispersion reactors

Mixing Performance in T-shape Microchannel at High Flow Rate for Villermaux-Dushman Reaction

Microscale Mixing Efficiency of Ultrasound-assisted Synergistic Microreactors

Experimental Approaches for Understanding Mixing Performance of A Minireactor

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Micromixing Simulation of Novel Large-Double-Blade Impeller

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Research on the Mixing Characteristic in S-shaped Micro-channel

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Experimental and CFD Studies on the Intensified Micromixing Performance of Micro-Impinging Stream Reactors Built from Commercial T-junctions

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Computational Fluid Dynamics Simulation and Experimental Study on Mixing Performance of a Three-Dimensional Circular Cyclone-Type Microreactor

VOF Modeling and Analysis of the Segmented Flow in Y-Shaped Microchannels for Microreactor Systems

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance