Abstract:In this work, the effect of rotary forward extrusion technique on the development of texture structure and mechanical anisotropy of Mg–12Gd–4Y–2Zn–0.4Zr sheets is studied. The experiments were carried out using a large-sized alloy (φ330 × 1100 mm) at an extrusion temperature of 460 °C and a high extrusion ratio (10.18). The average grain size of the alloy gradually decreases from 126.3 μm to 10 μm with increasing cumulative stress during rotary forward extrusion, the size of the second phase also decreases significantly and is uniformly distributed. At the same time, an abnormal texture (an abnormal extrusion texture with c-axis parallel to extrusion direction) parallel to the extrusion direction (ED) was formed by the rotation of grains, which was caused by the rotation of the basal plane along the principal stress axis driven by the continuous non-basal plane slip under high stress conditions. Dynamic recrystallized (DRX) also plays an essential role in the formation of the abnormal texture, where the DRX process produces a proportion of grains with the nucleation orientation . The subsequent preferential growth of these grains further promotes the rotation of the majority of grains oriented in the direction. Although the nucleation phase of DRX contributes to the formation of abnormal texture, the preferred growth stage of grains has a greater influence on the abnormal texture. In addition, due to the introduction of strong shear stresses, the degree of buckling and fragmentation of the Long Period Stacking Ordered (LPSO) phase is enhanced in all directions, which in turn reduces the morphological differences in different directions, ultimately leading to a significant weakening of mechanical anisotropy. This weakening of mechanical anisotropy is closely related to the homogeneity of the grain size and the differences in the morphology of the LPSO phases. Graphical

Revealing the microstructure, texture evolution and mechanical properties along the whole wall of Mg-Gd-Y-Zn-Zr cylinders by tailoring rotary backward extrusion parameters

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Formation of Abnormal Texture and Anisotropy Weakening Mechanism of Mg–Gd–Y–Zn–Zr Sheets by Rotary Forward Extrusion

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route

Microstructure Evolution and Mechanical Properties of Mg-10.37Gd-3.66Y-2.27Zn-0.52Zr Alloy during Reciprocating Upsetting-Extrusion

Influence of Extrusion Ratio on Microstructure and Tensile Properties of Mg–Gd–Y–Zn–Zr Alloy

Effects of die motion parameters on the microstructures and mechanical properties of rotary backward extruded AZ80 alloys

Evolution of Texture and Mechanical Anisotropy of Mg-13Gd-4Y-2Zn-0.5Zr Sheet Produced by Rotary Forward Extrusion

Grain Refinement and Second Phases Evolution of Mg-13Gd-4Y-2Zn-0.4Zr Sheet During Processing by Rotary Forward Extrusion

High Performance Mg Alloy with Designed Microstructure and Phases

Investigation of the optimum preheating treatment parameters for extruded Mg–Gd–Y–Zn–Zr alloy using high-throughput experiments

Microstructure and mechanical properties of a low-alloyed Mg-Zn-Al-Ca alloy: Effect of extrusion speed

Achieving Enhanced Mechanical Properties of Extruded Mg-Gd-Y-Zn-Zr Alloy by Regulating the Initial LPSO Phases

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Influence of bimodal microstructure on strength and ductility of as-extruded Mg-Gd-Y-Zr alloy

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging

Optimization of Microstructure and Mechanical Property of a Mg-Zn-Y-Nd Alloy by Extrusion Process