Abstract:In this work, the effect of rotary forward extrusion technique on the development of texture structure and mechanical anisotropy of Mg–12Gd–4Y–2Zn–0.4Zr sheets is studied. The experiments were carried out using a large-sized alloy (φ330 × 1100 mm) at an extrusion temperature of 460 °C and a high extrusion ratio (10.18). The average grain size of the alloy gradually decreases from 126.3 μm to 10 μm with increasing cumulative stress during rotary forward extrusion, the size of the second phase also decreases significantly and is uniformly distributed. At the same time, an abnormal texture (an abnormal extrusion texture with c-axis parallel to extrusion direction) parallel to the extrusion direction (ED) was formed by the rotation of grains, which was caused by the rotation of the basal plane along the principal stress axis driven by the continuous non-basal plane slip under high stress conditions. Dynamic recrystallized (DRX) also plays an essential role in the formation of the abnormal texture, where the DRX process produces a proportion of grains with the nucleation orientation . The subsequent preferential growth of these grains further promotes the rotation of the majority of grains oriented in the direction. Although the nucleation phase of DRX contributes to the formation of abnormal texture, the preferred growth stage of grains has a greater influence on the abnormal texture. In addition, due to the introduction of strong shear stresses, the degree of buckling and fragmentation of the Long Period Stacking Ordered (LPSO) phase is enhanced in all directions, which in turn reduces the morphological differences in different directions, ultimately leading to a significant weakening of mechanical anisotropy. This weakening of mechanical anisotropy is closely related to the homogeneity of the grain size and the differences in the morphology of the LPSO phases. Graphical

Grain Refinement and Second Phases Evolution of Mg-13Gd-4Y-2Zn-0.4Zr Sheet During Processing by Rotary Forward Extrusion

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Evolution of Texture and Mechanical Anisotropy of Mg-13Gd-4Y-2Zn-0.5Zr Sheet Produced by Rotary Forward Extrusion

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Formation of Abnormal Texture and Anisotropy Weakening Mechanism of Mg–Gd–Y–Zn–Zr Sheets by Rotary Forward Extrusion

Microstructure Evolution and Mechanical Properties of Mg-10.37Gd-3.66Y-2.27Zn-0.52Zr Alloy during Reciprocating Upsetting-Extrusion

Effects of grain refinement and precipitate strengthening on mechanical properties of double-extruded Mg-12Gd-2Er-0.4Zr alloy

Microstructure and Texture Evolution of Mg-Gd-Y-Zr Alloy during Reciprocating Upsetting-Extrusion

Effects of temperature-induced variation of the second phase on the microstructure, texture and properties of Mg-RE-Zn alloys

Revealing the microstructure, texture evolution and mechanical properties along the whole wall of Mg-Gd-Y-Zn-Zr cylinders by tailoring rotary backward extrusion parameters

Deformation-induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys

Promotion Effect of Secondary Phase Particles on Grain Refinement of Deformed Mg–Y–Nd–Zn Alloy

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Effect of Y and Gd solutes on grain refinement of the as-extruded Mg-Gd(-Y)-Zn-Mn alloys

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route

Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing

Investigation of the optimum preheating treatment parameters for extruded Mg–Gd–Y–Zn–Zr alloy using high-throughput experiments

The Microstructural Evolution and Grain Growth Kinetics of Fine-Grained Extruded Mg-Nd-Zn-Zr Alloy

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging