Abstract:Solution-processable copper-doped non-stoichiometric molybdenum oxide (Cu:MoO x ) films were prepared by a sol–gel method and applied as hole injection layer (HIL) in polymer light-emitting diodes (PLEDs). Optical transmittance spectra and scanning electron microscopy images showed that both MoO x (pristine oxide, without Cu) and Cu:MoO x films are transparent and homogeneous, and an increase in surface roughness and electrical conductivity was observed after the Cu incorporation. According to Kelvin probe force microscopy images, the average surface potential value is more negative for the Cu:MoO x(1 and 5%) films than for the MoO x film (control), suggesting that there is an increase in the number of hole carriers. In fact, it was demonstrated that the electric conductivity, surface roughness, work function, and morphology of the HIL could be tuned by varying the concentration of Cu in the MoO x films. To demonstrate possible applications of these materials, PLEDs were assembled using MoO x and Cu:MoO x films as HIL and two different emissive layers: poly[9,9-dioctylfluorenyl-2,7-diyl]-end capped with dimethylphenyl (PFO, blue light emitting polymer) and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV, red light emitting polymer). MEH-PPV-based PLED composed of Cu:MoO x(1%) HIL delivered the best performance, with a current efficiency (η curr ) of 313.9 mcd A −1 (at 10 V), an intense red color (CIE 0.493; 0.506), and a turn-on voltage (V ON ) of 4.8 V. PFO-based PLED containing the Cu:MoO x(5%) film showed the best results: η curr of 124 mcd A −1 (at 10 V), an intense blue color (CIE 0.168; 0.218) and V ON of 4.8 V. We observed that the Cu:MoO x films promoted an enhancement in brightness and overall performance, and caused a significant change in the morphology and electroluminescence profile of the diodes. Those results opened a new range of possibilities to investigate in detail the electrical, optical, and morphological properties of MoO x and Cu:MoO x films as HIL in PLEDs.

Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Record High External Quantum Efficiency of 20% Achieved in Fully Solution-Processed Quantum Dot Light-Emitting Diodes Based on Hole-Conductive Metal Oxides

Use of Hybrid PEDOT:PSS/Metal Sulfide Quantum Dots for a Hole Injection Layer in Highly Efficient Green Phosphorescent Organic Light-Emitting Diodes

Quantum-dot Light-Emitting Diodes with Fermi-level Pinning at the Hole-Injection/hole-transporting Interfaces

Synthesis of Cu-Modified Nickel Oxide Nanocrystals and Their Applications As Hole-Injection Layers for Quantum-Dot Light-Emitting Diodes

Enhancing the Performance of Quantum Dot Light-Emitting Diodes Using Solution-Processable Highly Conductive Spinel Structure CuCo2O4 Hole Injection Layer

High‐Performance Quantum‐Dot Light‐Emitting Diodes Using NiOx Hole‐Injection Layers with a High and Stable Work Function

Solution Process Feasible Highly Efficient Organic Light Emitting Diode with Hybrid Metal Oxide Based Hole Injection/Transport Layer

A Low-Temperature-annealed and UV-ozone-enhanced Combustion Derived Nickel Oxide Hole Injection Layer for Flexible Quantum Dot Light-Emitting Diodes

Utilization of Nanoporous Nickel Oxide as the Hole Injection Layer for Quantum Dot Light-Emitting Diodes

Enhanced Performance of Quantum Dot-Based Light-Emitting Diodes with Gold Nanoparticle-Doped Hole Injection Layer

High-Performance, Solution-Processed, and Insulating-Layer-Free Light-Emitting Diodes Based on Colloidal Quantum Dots.

Solution-processable copper-doped molybdenum oxide films as hole injection interfacial layer in polymer light-emitting diodes

Solution-processed, High-Performance Light-Emitting Diodes Based on Quantum Dots

Enhanced efficiency and high temperature stability of hybrid quantum dot light-emitting diodes using molybdenum oxide doped hole transport layer

Solution‐Processable Small‐Molecule Hole Transport Material for High‐Performance QLED via Manipulating Dipole Moments

Promoted Hole Transport Capability by Improving Lateral Current Spreading for High‐Efficiency Quantum Dot Light‐Emitting Diodes

Efficient and stable InP quantum-dot light-emitting diodes formed by premixing 2-hydroxyethyl methacrylate into ZnMgO

Flexible Substrate–Compatible and Efficiency–Improved Quantum–Dot Light–Emitting Diodes with Reduced Annealing Temperature of NiOx Hole–Injecting Layer

Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance