Abstract:Acoustic emission (AE) is a technique which has been widely used in geomechanics to study the progressive micro-cracking behavior of rocks in response to different loadings. However, the study of the combined effects of thermal damage and specimen size on the performance of rocks using the AE technique is still limited, which needs further investigation. This study experimentally investigated the AE characteristics of a fine-grained marble with different thermal damages and specimen sizes. The variation of AE counts in response to the rock deformation can divide the stress−strain relation into several stages. The AE activity is limited in the initial deformation stage and multiplies at a stress level about 0.7 to 0.8 times the peak stress. However, the AE signals in the initial stage become more prominent as the treatment temperature increases. The accumulated AE parameters (i.e., AE counts, AE hits, and AE energy) are found to decrease with the increase in the treatment temperature. The b-value, which generally decreases as the stress approaches the peak strength, correlates well with the stress−strain relation. It is also found that the b-value generally increases as the treatment temperature gradually increases, which is mainly attributed to the initially generated thermal micro-cracks in the rock specimen. The real-time spatial distribution of AE events is in considerable agreement with the failure mode observed in laboratory tests. Overall, the results in this study reveal that the AE technique is capable of studying the micro-cracking behavior involved in the deformation process of rocks possessing different degrees of thermal damage and with different specimen sizes.

Investigation on the microcrcaks strengthening effect in the damage behavior of Al2TiO5 flexible ceramics based on the AE

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

The influence of ZrO2 on the microstructure and mechanical properties of Al2TiO5 flexible ceramics

The influence of sintering temperature on the mechanical evolution of Al2TiO5 flexible ceramics based on the acoustic emission

Effects of Residual Stresses on Strength and Crack Resistance in ZrO2 Ceramics with Alumina Coating

Effects of MgO and Fe2O3 additives on the microstructure and fracture properties of aluminium titanate flexible ceramics

Influence of Cooling Rates on the Microstructure and Mechanical Properties of Aluminum Titanate Flexible Ceramic

The damage mode automatic identification of Al2TiO5 flexible ceramics based on machine learning

The influence of different additives on microstructure and mechanical properties of aluminum titanate ceramics

Effects of rare-earth oxides on the microstructure and mechanical properties of Al2TiO5 flexible ceramics

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Damage mechanism of Al2O3f/Al2O3 composites by acoustic emission technology

Acoustic emission characteristics of a fine-grained marble with different thermal damages and specimen sizes

The Stiffness and Strength of Transformation Toughening Ceramics with Misoriented Microcracks

Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography

Sintering temperature‐dependence of the flexibility of ZrO2 modified Aluminum titanate flexible ceramics

Staged Damage Behavior and Acoustic Emission Characteristics of Rock-Like Materials under the Coupled Effects of Clay Mineral Content and Uniaxial Loading

Stiffness and strength of phase transformation ceramics containing misoriented microcracks

Improving the Thermal Shock Resistance of Ceramics by Crack Arrest Blocks

Mechanical property and failure mechanism of coated Al2O3f/SiO2 composites by acoustic emission technology (AE)