Abstract:Highlights • Superconducting joints using carbon-doped multifilament MgB 2 wires were fabricated. • The joints showed a magnetic field screening effect up to 0.5 T at 20 K. • An SEM image of the cross-section of the joint showed a defect-free interface. • Serial sectioning revealed the formation of space or void at the interface. The development of superconducting joining technology for reacted magnesium diboride (MgB 2 ) conductors remains a critical challenge for the advancement of cryogen-free MgB 2 -based magnets for magnetic resonance imaging (MRI). Herein, the fabrication of superconducting joints using reacted carbon-doped multifilament MgB 2 wires for MRI magnets is reported. To achieve successful superconducting joints, the powder-in-mold method was employed, which involved tuning the filament protection mechanism, the powder compaction pressure, and the heat treatment condition. The fabricated joints demonstrated clear superconducting-to-normal transitions in self-field, with effective magnetic field screening up to 0.5 T at 20 K. To evaluate the interface between one of the MgB 2 filaments and the MgB 2 bulk within the joint, serial sectioning was conducted for the first time in this type of superconducting joint. The serial sectioning revealed space formation at the interface, potentially caused by the volume shrinkage associated with the MgB 2 formation or the combined effect of the volume shrinkage and the different thermal expansion coefficients of the MgB 2 bulk, the filament, the mold, and the sealing material. These findings are expected to be pivotal in developing MgB 2 superconducting joining technology for MRI magnet applications through interface engineering.

Effect of interface angle, added powder and applied deformation on the transport current and structure of scarf joints of single- and multi-core unreacted MgB2 wires

Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires

Influence of mechanical reinforcement of MgB2 wires on the superconducting properties

Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires

Effect of Heat Treatments under High Isostatic Pressure on the Transport Critical Current Density at 4.2 K and 20 K in Doped and Undoped MgB2 Wires

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

Anisotropic Connectivity and its Influence on Critical Current Densities, Irreversibility Fields, and Flux Creep in In-Situ-Processed MgB2 Strands

Microstructure and high critical current of powder in tube MgB2

Investigation of Layered Structure Formation in MgB2 Wires Produced by the Internal Mg Coating Process under Low and High Isostatic Pressures

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Superconducting properties of MgB2 wires and tapes with different metal sheaths

High transport critical currents in dense, metal-clad superconductor wires of MgB2

Superconducting joints using reacted multifilament MgB 2 wires: A technology toward cryogen-free MRI magnets

High transport critical current in MgB2/Fe wire by in situ powder-in-tube process

High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes

Supercurrents in magnesium diboride/metal composite wire

Improving superconducting properties of 100 m class MgB 2 wire with 18+1 filaments produced via internal Mg diffusion process

Superconducting properties of the powder-in-tube Cu-Mg-B and Ag-Mg-B wires

Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique

MgB 2 Superconducting Joint Technique Based on Mg Diffusion Method

Interface effects on current transport properties in multi-layered (Ba, K)Fe2As2 superconducting wires