Abstract:Metal hydrides are interesting materials from a fundamental as well as practical point of view. In particular, Ti-based BCC solid solutions are considered as promising candidates for mobile applications because of their high volumetric capacities and room temperature operation. However, the slow kinetics of the first hydrogenation, the so-called activation step, is an important hurdle in the use of these alloys for practical applications. It has recently been shown that doping a Ti-V-Cr composition with Zr7Ni10 leads to a fast activation kinetic without heating treatment [1]. We studied the effect of this doping on two new Ti-V-Cr compositions: 52Ti-12V-36Cr and 42Ti-21V-37Cr. Two different doping methods were investigated: i) a single-melt synthesis where the raw materials (i.e. Ti, V, Cr, Zr and Ni) chunks were mixed and arc-melted; ii) co-melt synthesis where 52Ti-12V-36Cr and 7Zr-10Ni were arc-melted independently and thereafter re-melted together. Using only X-ray diffraction for structural identification does not provide information about hydrogen localization. Therefore, neutron diffraction is essential for complete determination of this class of hydrides. The peculiarity of the present alloys is that, for neutron diffraction, the scattering lengths of the elements almost cancel. Therefore, the neutron pattern of as-cast alloy shows very small Bragg peaks but the advantage is that the hydride is very easy to see and analyze. We performed in-situ neutron diffraction experiments during dehydrogenation of these materials to see the transition from the dihydride to monohydride. These measurements were complementary to X-ray and synchrotron radiation diffraction and enabled a better crystal structure determination of these alloys

In-situ synchrotron based high energy X-ray diffraction study of the deformation mechanism of δ-hydride in a commercially pure titanium

In-situ synchrotron-based high energy X-ray diffraction study of the deformation mechanism of δ-hydrides in a commercially pure titanium

Effect of pre-deformation on hydrogen diffusion and hydrogen induced damage in commercially pure titanium

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Effect of electrochemical hydrogen charging on defect structure in titanium

Hydrogen Diffusion-Induced Crystallographic Changes in Α Plus Β Titanium Alloy

Improving the Mechanical Processing of Titanium by Hydrogen Doping: A First-Principles Study

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

An Experimental Study of the (ti–6al–4v)–xh Phase Diagram Using in Situ Synchrotron XRD and TGA/DSC Techniques

Role of intracrystalline hydrogen on the ductility of dilute Ti-based alloys by first-principles calculations

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Hydride precipitation dependence on α-parent orientation and plastic deformation in zirconium alloys

In situ X-ray diffraction study of dehydrogenation of MgH 2 with Ti-based additives

Hydrogen-surface interaction from first-principles calculations and its implication to hydrogen embrittlement mechanisms of titanium

Effect of Hydrogen on the Development of Deformation and Fracture in Titanium Alloy VT22 in the Temperature Range of 293–823 K

On the effects of transformation strain induced by hydride precipitation

Effect of hydrogen on the structural and phase state and defect structure of titanium alloy

Repair of embrittlement induced by different hydride configurations by dissolving partial hydrides using pulsed electric current

Study of Ti-V-Cr metal hydrides by neutron powder diffraction

Effect of hydrogen on hot deformation behavior and microstructure evolution of Ti65 alloy