Abstract:Hydrogen has been investigated for decades as a temporary alloying element to refine the microstructure of Ti–6Al–4V, and is now being used in a novel powder metallurgy method known as “hydrogen sintering and phase transformation”. Pseudo-binary phase diagrams of (Ti–6Al–4V)–xH have been studied and developed, but are not well established due to methodological limitations. In this paper, in situ studies of phase transformations during hydrogenation and dehydrogenation of (Ti–6Al–4V)–xH alloys were conducted using high-energy synchrotron X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The eutectoid phase transformation of β↔α+δ was observed in the (Ti–6Al–4V)–xH alloy via in situ synchrotron XRD at 211°C with a hydrogen concentration of 37.5at.% (measured using TGA–DSC). The relationships of hydrogen composition to partial pressure and temperature were investigated in the temperature range 450–900°C. Based on these results, a partial pseudo-binary phase diagram of (Ti–6Al–4V)–xH is proposed for hydrogen compositions up to 60at.% in the temperature range 100–900°C. Using the data collected in real time under controlled parameters of temperature, composition and hydrogen partial pressure, this work characterizes relevant phase transformations and microstructural evolution for practical titanium–hydrogen technologies of Ti–6Al–4V.

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Atomic-scale investigation of hydrogen distribution in a Ti-Mo alloy

Formation of Titanium Hydride in Ti–6Al–4V Alloy

Microstructural Evolution and Formation Mechanism of FCC Titanium Hydride in Ti–6Al–4V–xH Alloys

An Experimental Study of the (ti–6al–4v)–xh Phase Diagram Using in Situ Synchrotron XRD and TGA/DSC Techniques

In-situ synchrotron-based high energy X-ray diffraction study of the deformation mechanism of δ-hydrides in a commercially pure titanium

Hydrogen Diffusion-Induced Crystallographic Changes in Α Plus Β Titanium Alloy

In-situ synchrotron based high energy X-ray diffraction study of the deformation mechanism of δ-hydride in a commercially pure titanium

An Investigation on Structure, Deformation and Fracture of Hydrides in Titanium with a Large Range of Hydrogen Contents

Deciphering Hydrogen Embrittlement Mechanisms in Ti6Al4V Alloy: Role of Solute Hydrogen and Hydride Phase

Influences of Hydrogenation on Room Temperature Microstructure of Ti6Al4V Alloy

First-principles Investigation of the Structure and Thermodynamic Properties of Titanium Hydrides

Effect of 0.770wt%h Addition on the Microstructure of Ti–6Al–4V Alloy and Mechanism of Δ Hydride Formation

Tem Investigations on Hydrogen Induced Phase Transformation in Ti-6al-4v Alloys

In Situ Study of Phase Transformations in Ti–6Al–4V–xH Alloys

Influence of Hydrogen on Solid Phase Transition in α+β Titanium Alloys

Microstructural Evolution and Hydride Precipitation Mechanism in Hydrogenated Ti–6Al–4V Alloy

Role of intracrystalline hydrogen on the ductility of dilute Ti-based alloys by first-principles calculations

Hydrogenation Properties of the Ti45Zr38−xYxNi17 (5 ≤ x ≤ 10) and the Ti45−zYzZr38Ni17 (5 ≤ z ≤ 15) Mechanically Alloyed Materials

Hydrogen Damage Process of Dual-Phase Ti-6Al-4V Alloy: from Surface Passive Film to the Interior Substrate

Multiphase and Microstructure Effects on the Hydrogen Absorption/desorption Behavior of a Ti–22Al–27Nb Alloy