Abstract:Carbon fiber-reinforced silicon carbide matrix (C f /SiC) composites have been widely used in aerospace for its superior properties. However, due to high hardness, heterogeneity, and anisotropy, many problems such as machining damage, low process efficiency, and rapid tool wear are encountered in machining C f /SiC composite. In this study, laser-induced oxidation-assisted milling (LOAM), as novel hybrid machining process, was proposed to enhance machinability of C f /SiC composites. Pulsed laser was used to induce oxidation reaction between C f /SiC composites and oxygen. Easily removable loose and porous oxides were produced, which were simultaneously removed with milling tool, leading to improved material removal rate and tool life. Oxidation mechanisms and influences of laser parameters on oxidation behavior of C f /SiC composite were studied. Conventional milling (CONV) without the assistance of laser was also performed on C f /SiC composite for comparative analysis. Milling force, tool wear, and surface quality were studied in detail. Under laser irradiation, C f /SiC composite was modified into metamorphic-layer that consisted of oxide layer and transition layer. Material irradiated with laser got melted, vaporized, and then reacted with oxygen, producing oxide. Oxide layer was formed due to the accumulation of oxide. Increasing laser energy density boosted oxidation reaction and increased the thickness of oxide layer. In contrast, increase in laser scanning speed decreased thickness of oxide layer. Results show that cutting force was extremely low and no tool wear occurred during milling oxide layer, indicating significant enhancement in machinability. Abrasive wear mainly occurred on flank face when milling transition layer. Surface damages, for instance fiber fracture and matrix fragmentation, were significantly contained by LOAM. Surface roughness Sa obtained via LOAM was 9.5 μm, which was lower than that obtained by CONV (35 μm). This study indicates that LOAM can achieve high-efficiency processing, low-defect surface, and prolonged tool life when machining C f /SiC composite.

Nanosecond laser-induced controllable oxidation of TiB2–TiC ceramic composites for subsequent micro milling

Improved machinability of TiB2–TiC ceramic composites via laser-induced oxidation assisted micro-milling

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Micro-milling of 65 vol% SiCp/Al composites with a novel laser-assisted hybrid process

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Enhanced machinability of SiCp/Al composites with laser-induced oxidation assisted milling

Effects of Process Parameters on the Microstructure and Mechanical Properties of a Laser Micro-Alloying TiB/Ti–6Al–4V Titanium Matrix Composite

High-temperature Oxidation Performance and Its Mechanism of TiC/Inconel 625 Composites Prepared by Laser Metal Deposition Additive Manufacturing

Machining of Ox-Ox (Al2O3/Al2O3) ceramics matrix composites by ultrafast laser

Enhancing machinability of Ti6Al4V by ultrashort-pulse laser-induced modification assisted grinding

Enhancing the Machinability of C f /SiC Composite with the Assistance of Laser-induced Oxidation during Milling

Effects of Laser Repetition Rate and Fluence on Micromachining of Tic Ceramic

Study on microstructure and tribological properties of nano/micron TiC/TC4 composites fabricated by laser melting deposition

Plasma electrolytic oxidation of Ti-6Al-4V alloy and its influence on the machinability during micro-milling

Micro-arc Oxidation for Improving High-Temperature Oxidation Resistance of Additively Manufacturing Ti2AlNb

Optimization of Processing Parameters and Microstructure Evolution of (TiB+La 2 O 3 )/Ti6Al4V Manufactured by Laser Melting Deposition

Preparation and Performance Study of Titanium‐Based Nanocomposites in Selective Laser Melting: Microstructure Regulation and Optimization of Mechanical Properties

Effect of Preliminary Ball Milling of Nanomodifiers on Their Efficiency in Laser Surface Treatment of Titanium

Fabrication and Characterization of Micro-Channels on Al2O3/TiC Ceramic Produced by Nanosecond Laser

Microstructure- and Cooling/lubrication Environment-Dependent Machining Responses in Side Milling of Direct Metal Laser-Sintered and Rolled Ti6Al4V Alloys

Laser Deposition‐additive Manufacturing of Ti–B/TiC Ceramics Reinforced Microlaminates